HP rp7440 Site Preparation Guide, Fourth Edition - HP Integrity rx7640 and HP - Page 13
HP Integrity rx7640 Server and HP 9000 rp7440 Server Overview, Detailed Server Description
View all HP rp7440 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
1 HP Integrity rx7640 Server and HP 9000 rp7440 Server Overview The HP Integrity rx7640 and HP 9000 rp7440 Servers are members of HP's business-critical computing platform family in the mid-range product line. The information in chapters one through six of this guide applies to the HP Integrity rx7640 and HP 9000 rp7440 Servers, except for a few items specifically denoted as applying only to the HP Integrity rx7640 Server. Chapter seven covers any information specific to the HP 9000 rp7440 Server only. IMPORTANT: Ensure a valid UUID is either in place or available prior to maintenance of these servers. This step is vital when performing upgrades and is recommended for existing hardware service restoration. Specific information for upgrades is found in the Upgrade Guide, Mid-Range Two-Cell HP Servers to HP Integrity rx7640 Server, located at the following URL:http://docs.fc.hp.com. The server is a 10U1 high, 8-socket symmetric multiprocessor (SMP) rack-mount or standalone server. Features of the server include: • Up to 256 GB of physical memory provided by dual inline memory modules (DIMMs). • Dual-core processors. • Up to 16 processors with a maximum of 4 processor modules per cell board and a maximum of 2 cell boards. • One cell controller (CC) per cell board. • Turbo fans to cool CPUs and CCs on the cell boards. • Up to four embedded hard disk drives. • One half-height DVD drive, two slimline DVDs or one DAT drive. • Two front chassis mounted N+1 fans. • Two rear chassis mounted N+1 fans. • Six N+1 PCI-X card cage fans. • Two N+1 bulk power supplies. • N+1 hot-swappable system oscillators. • Sixteen PCI slots divided into two IO Chassis each. Each IO Chassis accommodates eight slots supporting PCI/PCI-X/PCI-X 2.0 device adapters or four PCI/PCI-X/PCI-X 2.0 and four PCIe device adapters. • Up to two core I/O card sets. • One manageability processor per core I/O card with failover capability when two or more core I/O cards are installed and properly configured. • Four 220 V AC power plugs. Two are required and the other two provide power source redundancy. Detailed Server Description The following section provides detailed information about the server components. 1. The U is a unit of measurement specifying product height. One U is equal to 1.75 inches. Detailed Server Description 13