HP t1000 T1000/T1010 Windows Based Terminal User's Guide for Firmware Version - Page 58
Connection Manager, Table 8-1, Troubleshooting the Terminal, Continued, Problem, Solution
View all HP t1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
44 Chapter 8 Table 8-1 Troubleshooting the Terminal, Continued Problem Solution You are not able to make a network connection using the Connection Manager. 1. Verify that the network cable is properly connected. 2. Verify that the network cable is connected to a hub or other network outlet. 3. Check with your network system administrator to ensure that the WBT is set up properly. While connected to a server the keyboard and the mouse freeze. The connection to the server may be broken. 1. Turn the terminal off, then on again. 2. Attempt to make another connection. If you can not make the connection again: 1. Verify that the network cable is properly connected. 2. Check with your network system administrator to ensure that you are using the correct network cable. Note If any other error messages are displayed, you have any other problems, or you can not find a solution in this table, contact your network system administrator.