HP t1000 T1500/T1510 Windows-based Terminal Network Installation Guide - Page 61
Appendices, A - T1500/T1510 Windows-Based Terminal Quick-Start Guide
View all HP t1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
A T1500/T1510 Windows-Based Terminal Quick-Start Guide The T1500/T1510 Windows-Based Terminal is shipped from the factory configured for local boot. Instructions are included in this appendix to convert to network boot if you require this mode of operation. If you require additional network services for a local-boot (default) terminal, you must use the server setup procedure. This procedure starts with Chapter 1 of this document. - OR - If you change the terminal to boot from a network server, you must perform the complete server setup procedure that starts with Chapter 1 of this document. Note If the site has a DHCP server and the terminal connects through the network port, except for power and interface cable connections the administrator can perform all of the setup functions from a remote server. Refer to T1500/T1510 Windows-Based Terminal Client Manager on the Software and Documentation CD (requires Adobe Acrobat Reader).