Hitachi 50GX49B Owners Guide - Page 17
Connecting A Stereo Laserdisc Player Or Dvd Player To, Input 2.
View all Hitachi 50GX49B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
CONNECTING EXTERNAL VIDEO SOURCES - 17 - NOTE: Completely insert the connection cord plugs when connecting to rear panel jacks. The picture that is played back will be abnormal if the connection is loose. If you have an S-VHS VCR, use the S-INPUT cable in place of the standard video cable. A single VCR can be used for VCR #1 and VCR #2, but note that a VCR cannot record its own video or line output. (INPUT: 1 in example on page 11.) Refer to your VCR operating guide for more information on line input-output connections. CONNECTING A STEREO LASERDISC PLAYER OR DVD PLAYER TO INPUT 2. 1. Connect the cable from the Y OUT of the Laserdisc or the DVD player to the INPUT 2 (Y) jack as shown on the TV set below. 2. Connect the cable from the CB OUT or B-Y OUT of the Laserdisc or the DVD player to the INPUT 2 (CB) jack, as shown on the TV set below. 3. Connect the cable from the CR OUT of the Laserdisc or the DVD player to the INPUT 2 (CR) jack, as shown on the TV set below. 4. Connect the cable from the AUDIO OUT R of the Laserdisc or DVD player to the INPUT 2 (AUDIO/R) jack. 5. Connect the cable from the AUDIO OUT L of the Laserdisc or DVD player to the INPUT 2 (AUDIO/L) jack. 6. Press the INPUT button until VIDEO:2 appears, to view the program from the Laserdisc or DVD player. The mode VIDEO:2 disappears automatically after approximately eight seconds. 7. Press the INPUT button to return to the previous channel.