Hitachi CPRS55 User Manual - Page 16

Power on/off Power on/off Turning on the power WARNING ►When the power is on, a strong light is emitted. Do not look into the lens or vents of the projector. NOTE • Turn the power on in right order. Please power on the projector before the connected devices. VIDEO RGB SEARCH ASPECT AUTO BLANK MAGNIFY ON OFF FREEZE VOLUME MUTE KEYSTONE POSITION - ZOOM + MENU ESC ENTER RESET STANDBY/ON button LAMP TEMP POWER INPUT MENU STANDBY/ON POWER indicator Power switch 1. Make sure that the power cord is firmly and correctly connected to the projector and outlet. 2. Open the lens cover, and set the power switch to the ON position. The power indicator will light to solid orange. Then wait several seconds because buttons may not function for these several seconds. POWER (Solid orange) 3. Press the STANDBY/ON button on the projector or remote control. The projector lamp will light up and the POWER indicator will begin blinking green. When the power is completely on, the indicator will stop blinking and light green. POWER (Blinking green) POWER (Solid green) To display the picture, select an input signal according to the section "Selecting an input signal" (18). 16