Hitachi CPRS55 User Manual - Page 30

Multifunctional settings IMAGE menu With the IMAGE menu, items shown in the table below can be performed. Choose an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to progress. Then perform it referring to the following table. MENU [RGB] PICTURE IMAGE INPUT SETUP SCREEN OPTION EASY MENU :SELECT ASPECT 4:3 OVER SCAN 95 V POSITION 25 H POSITION 142 H PHASE 16 H SIZE 1344 AUTO ADJUST EXECUTE Item ASPECT OVER SCAN V POSITION H POSITION H PHASE Description Using the buttons ▲/▼ switches the mode for aspect ratio. At a RGB signal 4:3  16:9  NORMAL At a video signal / no signal 4:3  16:9 • The NORMAL mode keeps the original aspect ratio of the signal. • At a HDTV component video signal of 1125i (1080i) or 750p (720p), this item can't be chosen. • Performing the automatic adjustment initializes the aspect ratio setting. Using the buttons ▲/▼ adjusts the over-scan ratio. Large (It reduces picture)  Small (It magnifies picture) • This item can be chosen only at a video signal. • When this adjustment is too large, certain degradation may appear at the frame area of the picture. In such a case, please adjust small. Using the buttons ▲/▼ adjusts the vertical position. Up  Down Using the buttons ▲/▼ adjusts the horizontal position. Left  Right Using the buttons ▲/▼ adjusts the horizontal phase to eliminate flicker. Right  Left • This item can be chosen only at a RGB signal or a component video signal (except 525i (480i) and 625i (576i)). 30