Hitachi CPX445 User Manual - Page 19

BLANK UP PAGE DOWN LASER Using the automatic adjustment feature Operating ASPECT 1. Press the AUTO button on the remote control. PUSH ENTER ESC MENU RESET  At a RGB signal POSITION AUTO The vertical position, the horizontal position, the clock MAGNIFY VOLUME ON phase and horizontal size will be automatically adjusted. FREEZE MUTE OFF Make sure that the application window is set to its maximum size prior to KEYSTONE ONETOUCH attempting to use this feature. A dark picture may still be incorrectly adjusted. Use a bright picture when adjusting.  At a video signal LASER INDICATOR STANDBY/ON VIDEO RGB The video format best suited for the respective input signal will be selecteUPd automatically. PAGE DOWN This function is available only when the AUTO mode is selected to the item VIDEO FORMAT of the INPUT menu (32). For a component vBiLdANKeo signLaASElR, the signal type is identified automatically independently of this function. ● The automatic adjustment operation requires approximately 10 seconds. Also please note that it may not function correctly with some input. ASPECT Adjusting the position 1. Press the POSITION button on the remote control. The "POSITION" indication will appear on the screen. PUSH ENTER ESC MENU RESET 2. Use the cursor buttons to adjust the picture position. POSITION AUTO MAGNIFY ON VOLUME FREEZE MUTE When you want to reset the operation, press the RESET button on tOFhF e remote KEYSTONE ONE TOUCH control during the operation. To complete this operation, press the POSITION button again. Even if you don't do anything, the dialog will automatically disappear after a few seconds. ● When this function is performed at a video signal, a certain extra such as a line may appear outside a picture. ● This function does not work when DVI-D input port is selected. 19