Hitachi CPX445 User Manual - Page 29

Multifunctional settings IMAGE Menu With the IMAGE menu, items shown in the table below can be performed. Select an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to progress. Then perform it referring to the following table. MENU [RGB] :SELECT PICTURE ASPECT 4:3 IMAGE OVER SCAN 95 VIDEO Qlty. V POSITION 25 INPUT H POSITION 142 SETUP H PHASE 16 SCREEN H SIZE 1344 OPTION AUTO ADJUST EXECUTE NETWORK EASY MENU Item Description Using the buttons ▲/▼ switches the mode for aspect ratio. At a RGB/DVI signal 4:3  16:9  NORMAL ASPECT OVER SCAN V POSITION H POSITION H PHASE At a video signal / no signal 4:3  16:9  SMALL • The NORMAL mode keeps the original aspect ratio of the signal. • At a HDTV signal of 1125i (1080i) or 750p (720p) of COMPONENT VIDEO input, this item can't be selected. • Performing the automatic adjustment initializes the aspect ratio setting. Using the buttons ▲/▼ adjusts the over-scan ratio. Large (It reduces picture)  Small (It magnifies picture) • This item can be selected only at a video signal. • When this adjustment is too large, certain degradation may appear at the frame area of the picture. In such a case, please adjust small. Using the buttons ▲/▼ adjusts the vertical position. Up  Down This item
is not selected when DVI-D input port is selected. Using the buttons ▲/▼ adjusts the horizontal position. Left  Right This item
is not selected when DVI-D input port is selected. Using the buttons ▲/▼ adjusts the horizontal phase to eliminate flicker. Right  Left • This item can be selected only at a RGB signal or a component video signal. Note that this does not work with the input signal of 525i(480i)/625i(576i) from the component video port. 29