Hitachi DV-P305U Owners Guide - Page 34

Setting Up the Audio Options

Get Hitachi DV-P305U PDF manuals and user guides View all Hitachi DV-P305U manuals
Add to My Manuals
Save this manual to your list of manuals

Page 34 highlights

Setting Up the Audio Options 1 Press the SETUP button when in stop mode. 2 Use the UP/DOWN button to select Audio Options. Then press the ENTER button. 3 Use the UP/DOWN button to select the desired item. Then press the LEFT/RIGHT button. (1) DIGITAL OUTPUT PCM : Converts to PCM(2CH) 48kHz/16bit audio. Select PCM when using 3D sound. BITSTREAM : Converts to Dolby Digital BITSTREAM (5.1CH). Select BITSTREAM when using the Dolby Digital Audio Output. NOTE : Be sure to select the correct Digital Output. (2) DTS ON : Outputs DTS BITSTREAM via digital output only. Select DTS when connecting to a DTS DECODER. OFF : Doesn't output DTS signal. (3) DYNAMIC COMPRESSION ON : To select dynamic compression. OFF : To select the standard range. (4) 2X SCAN AUDIO ON : Turns 2X audio on. OFF : Turns 2X audio off. Though 2X SCAN AUDIO is ON in the Setup Menu, no sound will be heard on discs which are recorded with LPCM, DTS or MPEG-Audio. NOTE - If the selected language is not recorded on the disc, the original pre-recorded language is selected. - How to make the Current Menu disappear and return to Setup Menu during set UP; Press RETURN button.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
Setting Up the Audio Options
1
Press the SETUP button when in stop mode.
2
Use the UP/DOWN button to select Audio Options. Then press the ENTER button.
3
Use the UP/DOWN button to select the desired item. Then press the LEFT/RIGHT button.
(1)
DIGITAL OUTPUT
PCM : Converts to PCM(2CH) 48kHz/16bit audio.
Select PCM when using 3D sound.
BITSTREAM : Converts to Dolby Digital BITSTREAM (5.1CH).
Select BITSTREAM when using the Dolby Digital Audio Output.
NOTE : Be sure to select the correct Digital Output.
(2)
DTS
ON : Outputs DTS BITSTREAM via digital output only. Select DTS
when connecting
to a DTS DECODER.
OFF : Doesn't output DTS signal.
(3)
DYNAMIC COMPRESSION
ON : To select dynamic compression.
OFF : To select the standard range.
(4)
2X SCAN AUDIO
ON : Turns 2X audio on.
OFF : Turns 2X audio off.
Though 2X SCAN AUDIO is ON in the Setup Menu, no sound will be heard on
discs which are recorded with LPCM, DTS or MPEG-Audio.
NOTE
- If the selected language is not recorded on the disc, the original pre-recorded language is selected.
-
How to make the Current Menu disappear and return to Setup Menu during set UP;
Press RETURN button.