Hitachi G10SS Instruction Manual - Page 3

English IMPORTANT SAFETY INFORMATION Read and understand all of the safety precautions, warnings and operating instructions in the Instruction Manual before operating or maintaining this power tool. Most accidents that result from power tool operation and maintenance are caused by the failure to observe basic safety rules or precautions. An accident can often be avoided by recognizing a potentially hazardous situation before it occurs, and by observing appropriate safety procedures. Basic safety precautions are outlined in the "SAFETY" section of this Instruction Manual and in the sections which contain the operation and maintenance instructions. Hazards that must be avoided to prevent bodily injury or machine damage are identified by WARNINGS on the power tool and in this Instruction Manual. NEVER use this power tool in a manner that has not been specifically recommended by HITACHI. MEANINGS OF SIGNAL WORDS WARNING indicates a potentially hazardous situations which, if ignored, could result in death or serious injury. CAUTION indicates a potentially hazardous situations which, if not avoided, may result in minor or moderate injury, or may cause machine damage. NOTE emphasizes essential information. SAFETY GENERAL SAFETY RULES WARNING: Read all instructions Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term "power tool" in all of the warnings listed below refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. SAVE THESE INSTRUCTIONS c) Do not expose power tools to rain or wet 1) Work area safety conditions. a) Keep work area clean and well lit. Water entering a power tool will increase the Cluttered or dark areas invite accidents. risk of electric shock. b) Do not operate power tools in explosive d) Do not abuse the cord. Never use the cord atmospheres, such as in the presence of for carrying, pulling or unplugging the power flammable liquids, gases or dust. tool. Power tools create sparks which may ignite Keep cord away from heat, oil, sharp edges the dust of fumes. or moving parts. c) Keep children and bystanders away while Damaged or entangled cords increase the risk operating a power tool. of electric shock. Distractions can cause you to lose control. e) When operating a power tool outdoors, use 2) Electrical safety an extension cord suitable for outdoor use. a) Power tool plugs must match the outlet. Use of a cord suitable for outdoor use reduces Never modify the plug in any way. the risk of electric shock. Do not use any adapter plugs with earthed 3) Personal safety (grounded) power tools. a) Stay alert, watch what you are doing and use Unmodified plugs and matching outlets will common sense when operating a power tool. reduce risk of electric shock. Do not use a power tool while you are tired b) Avoid body contact with earthed or grounded or under the influence of drugs, alcohol or surfaces such as pipes, radiators, ranges and medication. refrigerators. A moment of inattention while operating There is an increased risk of electric shock if power tools may result in serious personal your body is earthed or grounded. injury. 3