Hitachi G12SA3 Instruction Manual - Page 14
Depressed Center Wheel Assembly And Disassembly, Warning
UPC - 717709010581
View all Hitachi G12SA3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
English DEPRESSED CENTER WHEEL ASSEMBLY AND DISASSEMBLY WARNING: Never attempt to assemble or disassemble the depressed center wheel, unless the power switch is in the "OFF" position and the electrical cord has been disconnected from the receptacle. 1. Assembly (1) Turn the disc grinder upsidedown so that the spindle is facing upward. (2) Align the oval-shaped indentation of the wheel washer with the notched part of the spindle, then attach them. (3) Fit the protuberance of the depressed center wheel onto the wheel washer. (4) Screw the wheel nut onto the spindle. (5) While pushing the push button with one Wrench hand, lock the spindle by turning the Wheel Nut depressed center wheel slowly with the Tighten other hand. Depressed Center Tighten the wheel nut by using the supplied Wheel wrench as shown in Fig. 5. Wheel Washer CAUTION: Tighten the wheel nut securely and confirm that the depressed center wheel does not wobble. Spindle 2. Disassembly To remove the depressed center wheel, simply reverse the above-mentioned procedure. Wheel Guard Push Button Fig. 5 14