Hitachi NT50GS Instruction Manual

Hitachi NT50GS - 2" Gas Powered 18 Gauge Straight Finish Nailer Manual

Get Hitachi NT50GS - 2inch Gas Powered 18 Gauge Straight Finish Nailer PDF manuals and user guides
UPC - 717709014428
View all Hitachi NT50GS manuals
Add to My Manuals
Save this manual to your list of manuals

Hitachi NT50GS manual content summary:

  • Hitachi NT50GS | Instruction Manual - Page 1
    HITACHI Instruction and safety manual Manuel d'instructions et de securite Instrucciones y manual de seguridad NT 65GS • NT 65GA • NT 65GB Gas Finish Nailer Cloueur gaz de finition Model Clavadora a gas de acabados Modele Modelo NT 50GS Gas Brad Nailer Cloueuse a essence avec clous a
  • Hitachi NT50GS | Instruction Manual - Page 2
    CARE PREPARING THE FUEL CELL PREPARING THE BATTERY TESTING THE NAILER LOADING NAILS NAILER OPERATION METHODS OF OPERATION ADJUSTING THE NAILING DEPTH USING THE HOOK USING THE NOSE CAP CLEARING A JAM MAINTENANCE MAINTENANCE AND INSPECTION SERVICE AND REPAIRS PARTS LIST Page 18 18 18 18 18 20 21 21
  • Hitachi NT50GS | Instruction Manual - Page 3
    DEFINICION DE LAS PALABRAS CLAVE 70 ACCESORIOS ESTANDAR 85 EXPLICACION LA ACCION DE CLAVADO ACCESORIOS OPCIONALES 85 DEL CLAVADOR HITACHI 70 APLICACIONES 85 SEGURIDAD INSTRUCCIONES IMPORTANTES DE SEGURIDAD PARA LA UTILIZACION DEL CLAVADOR 71 INTRUCCIONES DE SEGURIDAD IMPORTANTES PARA
  • Hitachi NT50GS | Instruction Manual - Page 4
    of the operating instructions, safety precautions and warnings in this manual before operating or maintaining this nailer. Failure to NOTE emphasizes essential information. EXPLANATION OF THE NAILING ACTION OF THE HITACHI NAILER 0 This tool has a FULL SEQUENTIAL ACTUATION MECHANISM. First, press
  • Hitachi NT50GS | Instruction Manual - Page 5
    SAFETY IMPORTANT SAFETY INSTRUCTIONS FOR USING NAILERS READ ALL INSTRUCTIONS This Nailer is powered by internal combustion device. This Nailer shall only be used with dispensers for combustible gas which are listed in this instruction manual. & DANGER 1. OPERATORS AND OTHERS IN WORK AREA MUST WEAR
  • Hitachi NT50GS | Instruction Manual - Page 6
    will (50°C) remain in the fuel cell. Failure to follow instructions may result in explosion or fire. Keep the Nailer, fuel cells NEVER POINT TOOL AT YOURSELF OR OTHERS IN WORK AREA. Always assume the Nailer contains fasteners. Never point the Nailer at yourself toward yourself or others, whether
  • Hitachi NT50GS | Instruction Manual - Page 7
    temperature below 120°F (50°C). Keep the Nailer, fuel cell and battery out of direct sunlight and out of in a vehicle. Keep out of reach of children. Look the storage area. 11. KEEP WORK AREA CLEAN. Cluttered areas invite injuries. Clear all work areas of unnecessary tools, debris, furniture
  • Hitachi NT50GS | Instruction Manual - Page 8
    noises, or otherwise appears defective, stop using it immediately and arrange for repairs by a Hitachi authorized service center. 24. TAKE FUEL CELL AND BATTERY OUT OF NAILER WHEN: 1) doing maintenance and inspection; 2) clearing a jam; 3) it is not in use; 4) leaving work area; 5) moving it to
  • Hitachi NT50GS | Instruction Manual - Page 9
    Continued IMPORTANT SAFETY INSTRUCTIONS FOR FUEL CELL READ ALL INSTRUCTIONS QI DANGER Fuel cell, fuel and propellant are flammable under pressure. Explosion / Fire Hazard Failure to follow all instructions may result in fire and explosion when handling dispensers for combustible gas for the purpose
  • Hitachi NT50GS | Instruction Manual - Page 10
    when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire. 12 will not reduce this risk. 13. This battery charger might be attached to HITACHI battery operated tools as a standard accessory. In this case, please confirm Instruction Manual of the HITACHI
  • Hitachi NT50GS | Instruction Manual - Page 11
    Nailer. Before using the model UC3SML battery charger, be sure to read all instructions and cautionary statements on it, the battery and in this manual. REMEMBER: USE ONLY HITACHI . 14. ALWAYS disconnect the power cord from its receptacle when battery can explode in a fire. short-circuit the battery.
  • Hitachi NT50GS | Instruction Manual - Page 12
    as this may result in a fire. 8. Do not leave the vehicle unattended during charging. EMPLOYER'S RESPONSIBILITIES 1. Ensure that this MANUAL is available to operators and personnel performing maintenance. 2. Ensure that Nailers are used only when operators and others in work area are wearing EYE
  • Hitachi NT50GS | Instruction Manual - Page 13
    is designed to assist you in the safe operation of the Nailer. Some illustrations in this Manual may show details or attachments that differ from those on your own Nailer. NAME OF PARTS 1. Gas Finish Nailer Top cover Actuator Chamber Handle Top cover Chamber Actuator Handle
  • Hitachi NT50GS | Instruction Manual - Page 14
    English 2. Gas Brad Nailer Top cover Chamber Actuator Handle Battery Piston I Driver blade CC' Trigger Hook Stop lever 4!' gtazia Firing head (outlet) Push lever Magazine cover Magazine 3. Battery Charger (UC3SML) Strap Battery installation hole I Connecting socket Charger
  • Hitachi NT50GS | Instruction Manual - Page 15
    Gas Finish Nailer Model Dimensions Length x Height x Width Weight Includes battery and fuel cell Nail capacity Cycle rate Battery Fuel Cell 2. Gas Brad Nailer Model Dimensions Length x Height x Width Weight Includes battery and fuel cell Nail capacity Cycle rate Battery Fuel Cell NT50GS 10-5/8"
  • Hitachi NT50GS | Instruction Manual - Page 16
    HITACHI nails for the NT65GS, NT65GB, NT65GA or the NT50GS. The use of any other nails can result in tool malfunction and/or nail breakdown, leading to serious injuries. Only nails shown in the Table below can be driven with this Nailer. Dimensions of nails 16 Gauge finish nails (straight
  • Hitachi NT50GS | Instruction Manual - Page 17
    cNT65GA> 15 Gauge finish nails (Angle: 34O) mtowfw/ / Min. English Max. b o ! 3 3 2-1/2" (65mm) n (7) cNT5OGS> 18 Gauge brad nails (straight) ------ , Min. .075" (1.9mm)11 1 5/8" (16mm) E i 3m .043„ (1.1mm)r I . .049" 11.25mm) Max. , , --0L_Ec_i. CV 'I 17
  • Hitachi NT50GS | Instruction Manual - Page 18
    sold separately O Fuel Cell (Code No. 728-981) O Lubricant oil (Code No. 885-546, No. 728- 986) O Degreaser/cleaner (Code No. 728-985) NOTE: Accessories are subject to change without any obligation on the part of HITACHI. APPLICATIONS O Nailing as finishing process for
  • Hitachi NT50GS | Instruction Manual - Page 19
    will go out. NOTE: The battery charging time becomes longer when a temperature is low or the voltage of the power source is too low. When the pilot lamp does not go off even if more than four hour has passed after start of the charging, stop the charging and contact your HITACHI AUTHORIZED SERVICE
  • Hitachi NT50GS | Instruction Manual - Page 20
    become completely exhausted. When you feel that the power of the tool becomes weaker, stop using the tool and recharge its battery. If you continue to use the tool and exhaust the electric current, the battery may be damaged and its life will become shorter. O Avoid recharging at high temperatures
  • Hitachi NT50GS | Instruction Manual - Page 21
    English WORKING ENVIRONMENT A WARNING • No flammable gas, liquid or other flammable objects at worksite. • Use outside or well-ventilated areas. Do not inhale. 1 • Keep the Nailer, .- 120°F MAX fuel cell and (50°C) battery away from sunshine and from temperature exceeding 120°F (50
  • Hitachi NT50GS | Instruction Manual - Page 22
    beginning the nailing work, test the Nailer by using the checklist below. Conduct the tests in the following order. If abnormal operation occurs, stop using the Nailer and contact a Hitachi authorized service center immediately. (1) REMOVE ALL NAILS, FUEL CELL AND BATTERY FROM NAILER. u ALL SCREWS
  • Hitachi NT50GS | Instruction Manual - Page 23
    the hole of adaptor. CS Adapter Stem Fuel cell Adapter Stem tut Fuel cell Battery indicator light (3) INSERT FUEL CELL INTO NAILER. (i) Push up and pull out the actuator. oars 2. Pull out 0 1. Push up NOTE: Insert a loose adapter according to the instructions in the figure. Insert into the
  • Hitachi NT50GS | Instruction Manual - Page 24
    tl (4) Remove the finger from the trigger and press the push lever against the workpiece with pulling back the nail feeder (B). (NT50GS: Unnecessary to pulling back nail feeder) E THE NAILER MUST NOT OPERATE. Do not pull trigger (7) If no abnormal operation is observed, you may load nails in the
  • Hitachi NT50GS | Instruction Manual - Page 25
    than 10 nails. • Use an unbroken nail strip with nails of all the same length. Nails (1) Lightly press the stop lever and gently pull out the magazine cover. Press 0 . Pull out The Nailer is now ready to operate. Removing the nails: (j) Pull the nail feeder (B) backward. (z) Return the
  • Hitachi NT50GS | Instruction Manual - Page 26
    guide grooves and Groove properly, then push the magazine cover forward to be latched. NAILER OPERATION Read section titled "SAFETY"(pages 5 -12). &DANGER • Operators and others in work lever and nose will become hot and get heated up after prolonged or rapid use. • Explosion and fire hazard. 120
  • Hitachi NT50GS | Instruction Manual - Page 27
    fuel cell from Nailer when: 1) it is not in use; 2) leaving work area; 3) moving it to another location; and 4) handing it to another person. • Be careful of unwanted fastener. If pulling the trigger more when not driving nail at the temperature below 30°F (0°C), an wanted fastener will Trigger fire)
  • Hitachi NT50GS | Instruction Manual - Page 28
    If nails are driven too shallow, turn the adjuster to the deep side. ® Stop turning the adjuster when a suitable ) position is reached for a nailing test. Connect the fuel cell and the battery to the Nailer. ALWAYS WEAR SAFETY GLASSES. Perform a nailing test. 28 (3) Install the hook on the
  • Hitachi NT50GS | Instruction Manual - Page 29
    -adjustment of nailing depth is required. CLEARING A JAM If nails are jammed in firing head, remove it, and adjust the nailing in the following order. A CAUTION • Remove the fuel cell and the battery from the Nailer. (I) Remove the fuel cell and the battery from the Nailer. (2) Remove all nails. 29
  • Hitachi NT50GS | Instruction Manual - Page 30
    English (5) Release the lock lever and open guide plate. Lock lever V ICt // / i(5) Guide Plate (Li) Remove the jammed nail with a slottedhead screwdriver. Close guide plate and latch. NOTE: • In case of frequent jam, contact a Hitachi authorized service center. 30
  • Hitachi NT50GS | Instruction Manual - Page 31
    Nailer. Some illustrations in this Manual may show details or attachments that differ from those on your own Nailer. MAINTENANCE AND INSPECTION
  • Hitachi NT50GS | Instruction Manual - Page 32
    without prior notice. a WARNING • Only service personnel trained by Hitachi, distributor or employer shall repair the Nailer. • Use only parts supplied or recommended by Hitachi for repair. All quality Nailers will eventually require servicing or replacement of parts because of wear from normal use
  • Hitachi NT50GS | Instruction Manual - Page 33
    push lever working Promote operator safety and Blow clean daily. properly. efficient Nailer operation. Operator troubleshooting PROBLEM Nailer operates, all the way. Too low temperature, warm up fuel cell under 120°F (50°C). Contact Hitachi for replacement. Replace piston ring. Replace piston.
  • Hitachi NT50GS | Instruction Manual - Page 34
    . CORRECTION Push the push lever all the way. Too low temperature, warm up fuel cell under 120°F (50°C). Exchange it with a new fuel cell. Contact Hitachi for replacement. Contact Hitachi for replacement. Clean as instructed on the maintenance sheet. Load more nails in the magazine. If red: charge
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
HITACHI
Instruction
and
safety
manual
Manuel
d'instructions
et
de
securite
Instrucciones
y
manual
de
seguridad
NT
65GS
•
NT
65GA
•
NT
65GB
Gas
Finish
Nailer
Cloueur
gaz
de
finition
Model
Clavadora
a
gas
de
acabados
Modele
Modelo
NT
50GS
Gas
Brad
Nailer
Cloueuse
a
essence
avec
clous
a
tete
perdue
Clavadora
a
gas
de
brads
(
NT65GS
ell
NT65GA
NT65GB
NT50O5
6,
DANGER
Improper
use
of
this
Nailer
can
result
in
death
or
serious
injury!
This
Manual
contains
important
information
about
product
safety.
Read
and
understand
this
Manual
before
operating
the
Nailer.
Never
allow
anyone
who
has
not
reviewed
this
manual.
6
DANGER
Une
utilisation
incorrecte
et
sans
respecter
la
securite
de
ce
cloueur
risque
d'entrainer
la
mod
ou
des
blessures
graves
!
Ce
manuel
renferme
des
instructions
importantes
sur
la
securite
de
l'outil.
Lire
et
bien
assimiler
ce
manuel
avant
d'utiliser
le
cloueur.
Ne
jamais
laisser
les
personnes
n'ayant
pas
etutdie
le
manuel
utiliser
l'outil.
PELIGRO
!La
utilization
inadecuada
e
insegura
de
este
clavador
puede
resultar
en
lesiones
serias
o
en
la
muerte!
Este
manual
contiene
informacion
importante
sobre
la
seguridad
del
producto.
Lea
y
entienda
este
manual
antes
de
utilizar
el
clavador.
No
deje
manejar
esta
herramienta
a
nadie
que
no
hays
leido
este
manual.
Hitachi
Koki