HoMedics UHE-WMTF185 User Manual - Page 8
Programmable Digital Humidistat, Night-light/display Light, Programmable Auto-off Timer, Auto-off,
View all HoMedics UHE-WMTF185 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
PROGRAMMABLE DIGITAL HUMIDISTAT The default humidistat setting is CO (continuous on). The programmable humidistat can be set in 5% increments, from 35% to 55% humidity. To program the humidity level, press the programmable humidistat button. The humidity level will increase by 5% each time the button is pressed and will be displayed on screen. Press the humidistat button repeatedly until the desired setting is reached. The display will show the set humidity level. NOTE: To eliminate any programmed humidistat setting, continue to press the programmable humidistat button until you reach CO (continuous on), one level above 55%. NOTE: When the set humidity level is reached, the humidifier will cycle off until the humidity in the room drops 7% below the set humidity level. The unit will cycle on until the set humidity level is reached again. NIGHT-LIGHT/DISPLAY LIGHT Press the night-light/display light button once to turn on the night-light. The light at the bottom of the water tank will turn on, illuminating the tank. Press the night-light/display light button a second time to leave the night-light on, but turn off the display light. Press the night-light/display light button a third time to turn off the night-light and display light so no lights are illuminated. Press the night-light/ display light button a fourth time to turn the display light back on. PROGRAMMABLE AUTO-OFF TIMER Press the programmable timer button until the desired timer setting is lit on the display. The programmable timer will cycle through the following settings: 2 hours, 4 hours, 8 hours, off. To cancel the timer at any time, press the programmable timer button until the timer turns off. NOTE: Always be sure the humidifier has a full tank of water prior to using the timer setting. AUTO-OFF When the water in the tank is empty, the humidifier will turn off and the out of water indicator will illuminate red on the display indicating it is time to refill the water tank. NOTE: It is normal to have a small amount of water in the water reservoir during and after use. CLEAN REMINDER The clean transducer/ultrasonic membrane indicator will illuminate, indicating it is time to clean the transducer/ultrasonic membrane. See cleaning instructions in the Cleaning and Care section of this manual. After cleaning, press and hold the clean transducer reset button until the red light turns off. 8