Honeywell CT3650 Owner's Manual - Page 13
Step 8. Set the Clock, Set Current Day and Time, Step 9. Programming
View all Honeywell CT3650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Factory Set Function (Feature Number 37) Do not change this setting. STEP 8. SET THE CLOCK M13346 Set Current Day and Time NOTE: On initial power-up, the screen flashes 1:00 pm until you press a key. ❑ Press . Set Current Day/Time ❑ Press Day until screen shows current day. ❑ Press Time or hour increments). until screen shows current time. (Tapping the Set Current Day/Time will advance the time in one ❑ Press Daylight Time until "DST" displays if daylight savings time is in effect. ❑ Press Run Program . STEP 9. PROGRAMMING The keyboard is located behind the thermostat cover. The three most frequently used keys are near the display. Pressing displays the current temperature settings. Pressing the and keys change the temperature. The thermostat displays day, time, program period, temperature, system and fan settings. There is an individual key for each of the four program periods: Wake -The program period when you want the house at a comfortable temperature when you get up and while you get ready for work or school. (This is a higher temperature during the heating season and a lower temperature during the cooling season). Leave -The program period you can set for an energy-saving temperature while you are away at work or school. (This is a lower temperature during the heating season and a higher temperature during the cooling season). 13 69-1285-2