Honeywell CT3650 Owner's Manual - Page 15
Program the First Day, until the desired day displays. Mon, Tue, Wed, Thu, Fri, Sat, Sun
View all Honeywell CT3650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Program the First Day Start by programming the wake time and temperature for one day. ❑ Press and release Wake . ❑ Press Day until the desired day displays. (Mon, Tue, Wed, Thu, Fri, Sat, Sun) ❑ Press time or until the desired time shows in the display. NOTE: Program times are in 15 minute intervals. For example, 8:00, 8:15, 8:30. ❑ Press or until the desired wake temperature displays. The setpoint temperature range is 40°F to 90°F (4.5°C to 32°C) for heating and 45°F to 99°F (7°C to 37°C) for cooling. ❑ Press Heat/Cool Settings to switch between setpoints. NOTE: Program times are the same for heating and cooling. ❑ Press or until the display shows the desired temperature setpoint. NOTE: You can program the fan to On or Auto for each program period. Setting Fan to On runs the system fan continuously in the program periods. ❑ Press Fan until the fan is at the desired setting (On or Auto). ❑ Press , Leave Return or Sleep and repeat these steps for each program period. The first day is now programmed. ❑ Repeat each step in Program the First Day for the rest of the week. NOTE: After the first day is programmed, you can copy that day to any other day using procedure in Copy a Day. ❑ Press Run Program when the entire week is programmed. 15 69-1285-2