Honeywell HCD544 User Manual - Page 15

SPECIAL Menu Functions Menu Item 1 CAMERA ID 2 DAY&NIGHT Description Sets a camera ID to be displayed on the monitor. See Adding a Camera ID Display. Options: ON = Display a camera ID. OFF = No ID displays. Sets the Day/Night mode. See Programming Day and Night Modes. Options: AUTO = Depending on the light level, the camera automatically switches to night mode. ON = The camera is forced into night mode at all times. OFF = The camera never switches to night mode regardless of the light level unless the LAMP connector is used to control the switch over mechanism. 3 PRIVACY 4 MIRROR 5 SHARPNESS Note Must be set to OFF before AGC can be set to OFF. Day&Night should be in OFF mode when using the external LAMP connector to control the Day/Night switch over mechanism. Masks certain areas of the screen from observation. Options: ON = Allows you to set a privacy zone. See Setting A Privacy Zone. OFF = No privacy zones are set. Produces a horizontal mirror image on screen. Options: ON = A horizontal mirror image appears on screen. OFF = No mirror image Sharpens the image on screen. Options: 0~15 = Adjusts the sharpness level. Excessive sharpening may cause picture noise. 0 = OFF Document 800-01954 Rev A 15 08/08