Honeywell HCM-646 Owners Manual - Page 8

Digital EasySet™ Control Operation (Model HCM-650) STEP 4: SET HUMIDITY • You can set your desired humidity in 1% increments anywhere from 30% to 60%. Fig. 12 • To set your desired humidity, press the humidity button up or down (Fig. 12). • When the display indicates your desired humidity setting wait 3 seconds. • After 3 seconds your desired humidity is set and the display will revert back to showing the current room humidity. NOTE: If you wish to change your humidity setting or check to see what you set, simply press the humidity button once and it will show you the set humidity. If you want to change it, continue to push the button up or down until you have reached your new desired humidity. Again, after 3 seconds the display will revert to showing the current room humidity. Fig. 13 • Once you have set your humidity the unit will operate under this desired setting until the unit is turned off. • When your desired room humidity has been reached your unit will shut off and the house icon on the top of your display will illuminate (Fig. 13). It will stay illuminated until your desired humidity decreases at which time your unit will turn back on. Protec™ Cleaning Cartridge The Protec™ Cleaning Cartridge will last 30 days or longer, depending on your usage. To install or replace your cartridge, simply remove the holder on the inside of your tank cap by turning it counter-clockwise . Replace the cartridge holder by by turning it clockwise (Fig. 14 & Fig. 15). Fig. 14 Cartridge Holder Fig. 15 Tank Cap Protec™ Cleaning Cartridge 8