Honeywell HZ2016 Owners Manual - Page 4
Safety Features, Troubleshooting - controls
View all Honeywell HZ2016 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
SAFETY FEATURES This heater is equipped with several devices and features for added protection. • A tip-over switch that disables the heater if it is accidentally tipped back wards or forwards. • A high temperature safety control prevents overheating (HI limit). • A backup thermal circuit breaker. • This heater is also equipped with motor thermal fuse that will shut down the motor should it operate at a higher than normal temperature. • This heater was created using a high quality safety plastic. TROUBLESHOOTING If your heater shuts off unexpectedly or fails to operate, one of your heater safety features may have been activated to prevent overheating. • Be sure it is plugged in and that the electrical outlet is working. • Check your Thermostat setting. The unit may simply be off because you have reached your desired heat setting. • Check for any obstructions. If you find an obstruction, turn the heater OFF and unplug it. • Allow the heater to cool completely, then remove the obstruction. Wait at least 10 minutes, then re-plug in the heater and follow the OPERATING INSTRUCTIONS for your unit. NOTE: IF YOU EXPERIENCE A PROBLEM, PLEASE RETURN THE HEATER TO THE PLACE OF ORIGINAL PURCHASE OR SEE YOUR WARRANTY. DO NOT ATTEMPT TO OPEN THE HEATER YOURSELF. DOING SO MAY VOID YOUR WARRANTY AND CAUSE DAMAGE TO THE HEATER OR PERSONAL INJURY. IF YOU HAVE ANY QUESTIONS REGARDING THIS HEATER, PLEASE CALL OR WRITE: Honeywell Consumer Relations Dept. Toll Free 1-800-332-1110 Email us at [email protected] Mail questions and comments to: Honeywell Consumer Products Business Consumer Relations Department 250 Turnpike Road Southborough, MA 01772 USA Please be sure to specify model number. 3