Honeywell HZ2800P Owners Manual - Page 2
Other Features, Operation / Using The Thermostat Feature
View all Honeywell HZ2800P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
HZ-2800_OM_Rev0.qx 4/25/05 2:38 PM Page 2 OPERATION / USING THE THERMOSTAT FEATURE • Place the heater on a firm, level surface free from obstructions, and at least 3 ft. (0.9m) away from any wall, furniture or combustible material. Fig. 1 • With the power selector knob in the OFF position ( ), plug the heater into a polarized 120V outlet. DO NOT FORCE THE POLARIZED PLUG INTO THE OUTLET; it will only fit one way. • Turn the thermostat control fully clockwise to the HIGH setting (Fig. 1). • To turn the heater on, rotate the power selector knob clockwise to the desired position: Fan Only ( ), Low ( ) - 900W, or High ( ) - 1500W (Fig. 2). The power light will illuminate. Fig. 2 • When the room reaches a comfortable temperature, slowly turn the thermostat control counter-clockwise until the heater goes off (Fig 3). This is the point at which the thermostat setting equals the room temperature. If left at this setting, the thermostat will automatically turn the heater on and off to maintain the selected temperature. • When you are finished using the heater, turn the power selector knob to the OFF position ( ). Fig. 3 NOTE: To use the fan only feature, turn the power selector knob clockwise to the "Fan" ( ) setting. The thermostat should be turned to the highest setting. OTHER FEATURES • This heater is equipped with a high temperature circuit breaker to help prevent overheating. • Model HZ-2410 is also equipped with an "Auto-Off" feature which turns off heat after 2 hours. To restart the heater, turn the selector knob to OFF, and then to your desired power level to resume heat. • This heater was crafted using a high quality safety plastic which allows for the "Cool-to-the-touch" exterior. • This heater has a convenient carrying handle and cord storage for ease of use/storage.