Honeywell HZ2800P Owners Manual - Page 3

HZ-2800_OM_Rev0.qx 4/25/05 2:38 PM Page 3 TROUBLESHOOTING If your heater shuts off unexpectedly or fails to operate, one of your heater safety features may have been activated to prevent overheating. • Be sure it is plugged in and that the electrical outlet is working. • Check your Thermostat setting. The unit may simply be off because you have reached your desired heat setting. • Check for any obstructions. If you find an obstruction, turn the heater OFF and unplug it. Allow the heater to cool completely, then remove the obstruction. Wait at least 10 minutes, then re-plug the heater in and follow the OPERATION instructions. CONSUMER RELATIONS Mail questions or comments to: Kaz, Incorporated Consumer Relations Dept. 250 Turnpike Road Southborough, MA 01772 Call us toll-free at: 1-800-332-1110 E-mail: [email protected] Or visit our website at: www.kaz.com Please be sure to specify a model number. NOTE: IF YOU EXPERIENCE A PROBLEM, PLEASE CONTACT CONSUMER RELATIONS FIRST, RETURN THE HEATER TO THE ORIGINAL PLACE OF PURCHASE OR SEE YOUR WARRANTY. DO NOT ATTEMPT TO OPEN THE MOTOR HOUSING YOURSELF, DOING SO MAY VOID YOUR WARRANTY AND CAUSE DAMAGE TO THE HEATER OR PERSONAL INJURY. ELECTRICAL RATING This product is rated 12.5 Amps (1500 watts) @ 120V, 60Hz. CLEANING AND STORAGE It is recommended that the heater be cleaned at least once a month. Save the box for off-season storage. • Turn the heater OFF, unplug it, and wait for the heater to cool. • Use a dry cloth to clean only the external surfaces of the heater. DO NOT USE WATER, WAX, POLISH OR ANY CHEMICAL SOLUTION. • Pack the heater in its original carton and store it in a cool, dry place.