Honeywell HZ519 Owners Manual - Page 3

FAHRENHEIT/CELSIUS Power Mode POWER Back-Lit F/C F/C Temperature Display • F/C feature functions from only the Power or Set Temperature screens. • Press the F/C button to toggle between Fahrenheit and Celsius. BACK-LIT DISPLAY Power Mode Back-Lit F/C Power Basic Remote LCD Remote • Press Power once to turn the heater on. • Press Power again to turn the heater off. • MODE: SET TEMPERATURE Temperature Mode Adjust Up or Down • The Back-lit feature provides light to the heater display and functions in any power or mode setting. • Press the Back-lit button to toggle this feature on and off. REMOTE CONTROL OPERATION Two (2) AAA batteries required. The HZ-519 is compatible with a Basic or LCD Remote Control which can be purchased separately at: www.honeywellconsumerproducts.com Basic Remote LCD Remote • Press Mode until the Temperature icon blinks. The current room temperature will appear. • Use the Up or Down arrows to set the desired temperature. • The Temperature icon will stop blinking and the current room temperature will reappear after the desired temperature is set. • The heater will turn-off shortly after the desired temperature is reached and the Power light above the display will blink. • The heater will turn back on when the room temperature drops approximately 2 degrees below the desired temperature. The Power light will stop blinking and will remain lit. The Remote Control works the same as the corresponding buttons on the Control Panel display on the heater and will show the appropriate icons when the various functions are activated. 3