Honeywell HZ519 Owners Manual - Page 4

•MODE: SET TIMER Timer Mode Adjust Up or Down Basic Remote LCD Remote • Press Mode until the Timer icon blinks. The Hour display will appear. • Use the Up or Down arrows to set an operation time between 1 and 10 hours. • The heater will turn-off when time runs out. BACK-LIT DISPLAY • Check for any obstructions. If you find an obstruction, turn the heater OFF and unplug it. Allow the heater to cool completely, then remove the obstruction. Wait at least 10 minutes, then replug in the heater, press Power and follow the OPERATION INSTRUCTIONS. • For more troubleshooting tips, visit our website at: www.honeywellconsumerproducts.com NOTE: IF YOU CONTINUE TO EXPERIENCE A PROBLEM, PLEASE RETURN THE HEATER TO THE PLACE OF ORIGINAL PURCHASE OR SEE YOUR WARRANTY. DO NOT ATTEMPT TO OPEN THE HEATER YOURSELF. DOING SO MAY VOID YOUR WARRANTY AND CAUSE DAMAGE TO THE HEATER OR PERSONAL INJURY. IF YOU HAVE ANY QUESTIONS REGARDING THIS HEATER, PLEASE CALL OR WRITE: Honeywell Consumer Relations Department 250 Turnpike Road Southborough, MA 01772 Toll Free 1-800-332-1110 E-mail: [email protected] Back-lit CLEANING AND STORAGE: Basic Remote LCD Remote • The Back-lit feature provides light to the heater display and functions in any power or mode setting. • Press the Back-lit button to toggle this feature on and off. TROUBLESHOOTING If your heater shuts off unexpectedly, safety features may have been activated to prevent overheating. If this happens: • Be sure the heater is plugged in and that the electrical outlet is working. • Check your temperature setting. The heater may simply be off because you have reached your desired heat setting. • This heater has a caution light located above the control panel. DO NOT operate the heater while the caution light is on. We recommend that the heater be cleaned at least once a month and before off-season storage. • Turn the heater OFF and unplug it. Allow it to cool completely. • Use only a dry cloth to clean the external sur- faces of the heater. DO NOT USE WATER, WAX, POLISH, OR ANY CHEMICAL SOLUTION. • Clean your heater using the above-mentioned steps, then pack the heater in its original container and store it in a cool, dry place. • This heater does not disassemble. ACCESSORIES: Your heater is compatible with both a Basic or LCD Remote Control. To upgrade your heater or to get a listing of available accessories, visit our website at: www.honeywellconsumerproducts.com 4