Honeywell T8001 Owner's Manual

Honeywell T8001 Manual

Honeywell T8001 manual table of contents:

  • Honeywell T8001 | Owner's Manual - Page 1
    T8000, T8001,T8002, T8011, T8024 Programmable Thermostats OWNER'S GUIDE 1 69-1431-1 69-1431-1
  • Honeywell T8001 | Owner's Manual - Page 2
    ...reliable, precise temperature control. When you follow the simple programming instructions in this manual, your thermostat automatically controls the temperature in your home,.... If you have questions, visit our web site at www.honeywell.com/yourhome, or call the customer information line at 1-800-468...
  • Honeywell T8001 | Owner's Manual - Page 3
    ... Planning Program Schedule ...5 Program Schedule ...6 Programming Thermostat ...7 Setting Current Time and Day ... Setting Indefinite Temperature Hold ...13 Operating Thermostat ...13 Setting SYSTEM and FAN ...Models) ...14 Minimum Off-Timing ...15 Troubleshooting ...16 Customer Assistance ...19 Warranty ...
  • Honeywell T8001 | Owner's Manual - Page 4
    ... ▲ KEY • PROGRAM TIME AND TEMPERATURE. • SET TEMPORARY TEMPERATURE HOLD. SELECT KEY • CURRENT SETPOINT. • CHANGE DAY AND TIME. • PROGRAM SELECTIONS. T8000, T8001 T8011, T8024 MODELS PM TUE Hold Selec t PM TUE Hold Sele ct T8002 MODEL FA Auto N On FA Auto N On Coo SYSTE l Off M ...
  • Honeywell T8001 | Owner's Manual - Page 5
    ... day, time, program period, and temperature. The thermostat can be set for four time periods per day for weekdays and weekend. Before programming the thermostat, you can use the program schedule to ... desire. If you decide not to program the thermostat, it uses the preprogrammed time and temperature ...
  • Honeywell T8001 | Owner's Manual - Page 6
    Program Schedule Weekday Wake Leave Return Sleep Weekend Wake Leave Return Sleep Start Time Start Time Heating Temperature Heating Temperature Cooling Temperature Cooling Temperature Wake and Return start times should include extra lead time, based on outside temperature and equipment ...
  • Honeywell T8001 | Owner's Manual - Page 7
    Programming Thermostat The thermostat is flexible and can be programmed for different schedules for weekdays and the weekend to meet your ... season, and a higher temperature during cooling season.) Return is the time the thermostat turns on the heating/cooling equipment after an energy saving period. ...
  • Honeywell T8001 | Owner's Manual - Page 8
    Sleep is the time period you can set for an energy-saving temperature while you are sleeping. (For more comfortable sleeping, some people choose not to raise the cool temperature during the night.) IMPORTANT Always press the keys with your fingertip or similar blunt tool. Sharp instruments like ...
  • Honeywell T8001 | Owner's Manual - Page 9
    Setting Weekday Program Slide the SYSTEM switch to the position, Heat or Cool, you want to program. A flame (heating) or a snowflake (cooling) appears in the right side of the display, when setting the program temperature. 3. Wake a. Press Select. Press ▲ or ▼ to set Wake SET time. 4. Leave a....
  • Honeywell T8001 | Owner's Manual - Page 10
    b. Press Select. Press ▲ or ▼ to set Return SET temperature. M12629B Setting Weekend Program 7. Wake a. Press Select. Press ▲ or ▼ to set Wake SET time. 6. Sleep a. Press Select. Press ▲ or ▼ to set Sleep SET time. M18569 b. M18568 Press Select. Press ▲ or ▼ to set Wake SET ...
  • Honeywell T8001 | Owner's Manual - Page 11
    8. Leave a. Press Select. Press ▲ or ▼ to set Leave SET time. b. Press Select. Press ▲ or ▼ to set Return SET temperature. M12637B M18550 b. Press Select. Press ▲ or ▼ to set Leave SET temperature. M12635B 10. Sleep a. Press Select. Press ▲ or ▼ to set Sleep SET time. M18554...
  • Honeywell T8001 | Owner's Manual - Page 12
    11. Press Select. End is displayed. Programming is complete. The thermostat reverts to displaying SET the current day time and temperature in five seconds. M18556 Setting Indefinite Temperature Hold The Hold key allows you to indefinitely hold a temperature. When Hold is active, the letters Hld are...
  • Honeywell T8001 | Owner's Manual - Page 13
    ... Both the heating and cooling are off. Heat: The thermostat controls the heating. Em. Ht. (heat ... the SYSTEM switch in the lower right corner of the thermostat to select the desired system setting. FAN ... the FAN switch in the lower left corner of the thermostat to select the desired fan setting. Heat ...
  • Honeywell T8001 | Owner's Manual - Page 14
    ... and day. If the display is blank when changing batteries, reset the time and day. Your program does not require resetting; it is stored permanently! Important: Even if you do not ...the batteries run low, your thermostat shows a "bAt Lo" message in the digital display. The message flashes ...
  • Honeywell T8001 | Owner's Manual - Page 15
    Minimum Off-Timing The thermostat minimum off-timer assures that the compressor does not come on again for at least five ... and T8001, T8002, T8024 (multistage model) and in first stage heating or cooling on the T8011 (heat pump model). A flashing flame or snowflake indicates the minimum off-time is ...
  • Honeywell T8001 | Owner's Manual - Page 16
    Troubleshooting Symptom Display does not come on. Action • Check if the thermostat is mounted and latched on the wallplate-mount and latch the thermostat on the wallplate. • Check if the circuit breaker is tripped-reset the circuit breaker. • Check if the fuse is blown-replace the ...
  • Honeywell T8001 | Owner's Manual - Page 17
    Troubleshooting (Continued). Symptom Heating does not come on. Action • Check if the circuit breaker is tripped-reset the ... is higher than the current room temperature and the flame is displaying, the thermostat is operating correctly. Contact a heating contractor for assistance. continued 17 ...
  • Honeywell T8001 | Owner's Manual - Page 18
    Troubleshooting (Continued). Symptom Cooling does not come on. Action • Check if the circuit breaker is tripped-reset the ... is lower than the current room temperature and the snowflake is displaying, the thermostat is operating correctly. Contact an air conditioning contractor for assistance. ...
  • Honeywell T8001 | Owner's Manual - Page 19
    Troubleshooting (Continued). Symptom System on indicator or is lit, but no warm or cool air is coming ...Customer Assistance If you have any questions concerning the operation of your thermostat, please visit us at www.honeywell.com or call the thermostat information helpline at 1-800-468-1502. 19 ...
  • Honeywell T8001 | Owner's Manual - Page 20
    ... defects in the workmanship or materials, under normal use and service, for a period of one (1) year from the date of purchase by the consumer. ..., at any time during the warranty period, the product is defective or malfunctions, Honeywell shall repair or replace it (at Honeywell's option) within a ...
  • Honeywell T8001 | Owner's Manual - Page 21
    ...replace the product within the terms stated above. HONEYWELL SHALL NOT BE LIABLE FOR ANY LOSS... to you. THIS WARRANTY IS THE ONLY EXPRESS WARRANTY HONEYWELL MAKES ON THIS PRODUCT. THE DURATION OF ANY IMPLIED... questions concerning this warranty, please write Honeywell Customer Relations, 1985 Douglas Dr...
  • Honeywell T8001 | Owner's Manual - Page 22
  • Honeywell T8001 | Owner's Manual - Page 23
  • Honeywell T8001 | Owner's Manual - Page 24
    Automation and Control Solutions Honeywell Limited-Honeywell Limitée Honeywell 35 Dynamic Drive ... 69-1431-1 Rev. 5-02 G.H. Copyright © 2002 Honeywell All Rights Reserved ® U.S. Registered Trademark ... paper containing at least 10% post-consumer paper fibers. www.honeywell.com/yourhome 69-1431-1



Type your new search above

The manual viewer requires the flash plugin to be installed and enabled.
To view this page ensure that Adobe Flash Player version 10 or greater is installed.

Honeywell T8001 Manual