Honeywell T8001 Owner's Manual - Page 17
Troubleshooting, Symptom, Action - reset
View all Honeywell T8001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Troubleshooting (Continued). Symptom Heating does not come on. Action • Check if the circuit breaker is tripped-reset the circuit breaker. • Check if the fuse is blown-replace the fuse. • Check if the switch at the equipment is in the Off position-set to On position. • Wait five minutes for the system to respond. • Set SYSTEM switch to Heat. • If the temperature setting is higher than the current room temperature and the flame is displaying, the thermostat is operating correctly. Contact a heating contractor for assistance. continued 17 69-1431-1
17
69-1431–1
Troubleshooting
(Continued)
.
continued
Symptom
Action
Heating does not come on.
•
Check if the circuit breaker is tripped—reset the
circuit breaker.
•
Check if the fuse is blown—replace the fuse.
•
Check if the switch at the equipment is in the Off
position—set to On position.
•
Wait five minutes for the system to respond.
•
Set SYSTEM switch to Heat.
•
If the temperature setting is higher than the current room
temperature and the flame
is displaying, the
thermostat is operating correctly. Contact a heating
contractor for assistance.