Hoover UH70040W Product Manual - Page 6

2-4 2-5 2-6 B A Cord rewind Grasp the end of the plug and pull to release cord from cord reel. After desired cord length is reached, the cord will lock into position. To return cord for storage, hold plug and press on button (A) at top of cord reel. To prevent cord from whipping, hold plug until cord is rewound. Telescoping handle The telescoping handle includes adjustable settings to various heights for user comfort. The handle is designed to retract into the body of the cleaner for convenience in storing or carrying the cleaner. Lower the handle by depressing the button (B) located at the handle base and pushing the handle down. Raise the handle by depressing the button and pulling the handle upward, locking it into the desired position. Transporting cleaner To move your cleaner from room to room, put handle in upright position, tilt cleaner back on rear wheels and push forward. 2-7 2-8 2-9 D Carrying cleaner The cleaner can also be moved by using the carrying handle. 2-10 Handle positions The handle of your cleaner has three positions; upright for storage and when using cleaning tools; operating position for general operation on carpet and floors; low for reaching under low furniture. Step on handle release lever to lower handle. push, turn knob to the next higher setting. • Higher settings: for very deep pile carpet, where easier pushing effort is desired, while maintaining good cleaning performance. C Carpet height adjustment The cleaning of carpet and rugs takes place at the nozzle (C). When it is necessary to raise and lower the nozzle for various carpet pile heights, turn the nozzle control knob (D) to the desired setting. Settings For maximum cleaning performance, the following carpet height settings are recommended: • Lowest setting: for all types of carpet. Note: If the cleaner is difficult to 6