Huawei ETS2055 User Manual - Page 10

2. The system finds the new hardware and installs the modem driver automatically. 3. The installation program automatically starts, and then the installation interface is displayed. 4. Follow the instructions of the installation program. 5. When the installation completes, a shortcut icon of the FWT management program is displayed on the desktop. Note: The operating system configuration requirement of a PC: Windows 2000, Windows XP, Windows Vista (32-bit or 64-bit). Accessing the Internet Before accessing the Internet, you need to set the network connection. If you use the default settings, skip the settings operations. 1. Connect the FWT to a PC with a compatible USB data cable. 2. Double-click the shortcut icon of the FWT management program. 3. Click Settings to set the network connection. 4. Click Connect. Note: You can consult your network operator for more information about the network connection. PC Fax Before using the fax service, do the following steps: 1. Install the modem driver on the PC. 2. Install the PC facsimile software on the PC. 3. Select Menu > Settings > Phone Settings > Data Service > Fax Mode. Start the facsimile service. Note: For the usage of PC fax software, see the description of particular software. This guide only describes operations on the FWT to use the PC fax function. Security FWT Lock The FWT lock protects your FWT from unauthorized use. The default FWT lock code is 0000. You can change it into any numeric string of 4 digits. Keypad Lock In standby mode, press and hold the # key to lock the keypad. In this case, you can answer an incoming calls or make emergency calls. In standby mode, press Left soft key and then press the * key to unlock the keypad. In standby mode, if the automatic keypad lock function is enabled and the standby time exceeds the 8