Hunter 36316 Owner's Manual - Page 6

Using Your Humidifier 2 Controls Speed Setting: Off Turns the unit off. Low: Extends the time between refills by running the fan on low. Lowest noise setting recommended for nighttime use. Medium: Average refill rate and optimal for day use. Minimal noise level. High: Use for quick humidification to a room during the day. Average noise level and quick refill rate. Humidity Control: The humidity control allows you to set the amount of humidity you want the unit to output. The humidty knob is a percentage, ranging from 30% at it's lowest to 80% at the highest. Turn the knob clockwise to increase humidity output. When the humidifier has reached the set humidity level, it will shut off until the humidity level drops agian. Speed Control Power Indicator Humidity Control Power Silver Ion Wick Silver Ion Silver Ion Wick Indicator Reset Reset Figure 4. Wick Indicator Indicators: Power Indicator: Indicates the unit is turned on. If the humidifier is not running, check that the humidity control has not turned the unit off by increasing the humidity. For additional help check "Troubleshooting" on page 9. Silver Ion Indicator / Reset Button: Lights up when it is time to replace the Silver Ion Cartridge. To reset, hold the Silver Ion Reset Button in until the light goes out. Wick Indicator / Reset Button: Lights up when it is time to replace the wick. To reset, hold the Silver Ion Reset Button in until the light goes out. 6 44056-01 • 05/18/2011