Husqvarna 323R-II Owners Manual
Husqvarna 323R-II Manual
 |
View all Husqvarna 323R-II manuals
Add to My Manuals
Save this manual to your list of manuals |
Husqvarna 323R-II manual content summary:
- Husqvarna 323R-II | Owners Manual - Page 1
Operator's manual (EPA) 323RII 327RX-series 327RDX-series Please read the operator's manual carefully and make sure you understand the instructions before using the machine. English - Husqvarna 323R-II | Owners Manual - Page 2
the contents of the operator's manual. Please read the operator's manual carefully and make sure you understand the instructions before using the machine. Always Only use non-metallic, flexible cutting attachments, i.e. trimmer heads with trimmer cord. Other symbols/decals on the machine refer to - Husqvarna 323R-II | Owners Manual - Page 3
the handlebar (323RII) 12 Fitting guard, grass blade and grass cutter 14 Fitting the blade guard TECHNIQUES General working instructions 21 MAINTENANCE Carburetor 26 read the operator's manual carefully. Maintenance, replacement parts. WARNING! A clearing saw, brushcutter ! or trimmer can - Husqvarna 323R-II | Owners Manual - Page 4
, service, maintenance etc) the life span and the second-hand value of the machine can be extended. If you ever lend or sell this machine, make sure that the borrower or buyer gets the operator′s manual, so they will also know how to properly maintain and use it. Thank you for using a Husqvarna - Husqvarna 323R-II | Owners Manual - Page 5
purge 16 Air filter cover 17 10 8 30 7 9 31 32 11 6 12 14 15 13 16 24 27 23 28 26 17 Handle adjustment 18 Locking nut 19 Support flange 20 Support cup 21 Drive disc 22 Trimmer head 23 Socket spanner 24 Operator's manual 25 Transport guard 26 Allen key 27 Locking pin 28 - Husqvarna 323R-II | Owners Manual - Page 6
service instructions described in this manual. Some maintenance and service measures must be carried out by trained and qualified specialists. See instructions carbon monoxide poisoning. IMPORTANT! A clearing saw, brushcutter or trimmer can be dangerous if used incorrectly or carelessly, and can - Husqvarna 323R-II | Owners Manual - Page 7
section. If your machine fails any of these checks contact your service agent to get it repaired. Throttle lockout The throttle lockout is throttle lockout move freely and that the return springs work properly. See instructions under the heading Start. Start the machine and apply full throttle. - Husqvarna 323R-II | Owners Manual - Page 8
in case the engine catches fire, or in any other situation that requires you to free yourself from the machine and harness. See instructions under the heading Adjusting the harness and clearing saw. Your machine is equipped with a vibration damping system that is designed to reduce vibration - Husqvarna 323R-II | Owners Manual - Page 9
For mufflers it is very important that you follow the instructions on checking, maintaining and servicing your machine. Never use a machine that has a faulty muf of fire! The nylon lining inside the locking nut must not be so worn that you can turn it by hand. The lining should offer a resistance of - Husqvarna 323R-II | Owners Manual - Page 10
replaced. Grass blades and grass cutters are intended for cutting coarse grass. A trimmer head is intended for trimming grass. Sharpening grass cutters and grass blades • See the cutting attachment packaging for correct sharpening instructions. Sharpen blades and cutters using a single-cut flat file - Husqvarna 323R-II | Owners Manual - Page 11
tested by the manufacturer to suit a particular engine size. This is especially important when a fully automatic trimmer head is used. Only use the recommended cutting attachment. See the chapter on Technical data. • Make sure that the blade is well supported that the cutter on the trimmer guard is - Husqvarna 323R-II | Owners Manual - Page 12
ASSEMBLY Fitting the handlebar (323RII) the machine is in a comfortable working position when it hangs from the harness. Tighten the knob. Unscrew the knob from the handlebar mounting. • Put on the harness and hang the machine from the support hook. Now make a final adjustment so that 12 - English - Husqvarna 323R-II | Owners Manual - Page 13
the attachment snaps into place. • Before using the unit, tighten the knob securely. • Put on the harness and hang the machine from the support hook. Now make a final adjustment so that the machine is in a comfortable working position when it hangs from the harness. Tighten the knob. Dismantling - Husqvarna 323R-II | Owners Manual - Page 14
pin (C) in the hole to lock the shaft. • Place the blade (D), support cup (E) and support flange (F) on the output shaft. • Fit the nut (G). The nut correct handlebar, blade guard and harness. Fitting a blade guard, grass blade and grass cutter Fitting the blade guard and saw blade G F E D K J H I - Husqvarna 323R-II | Owners Manual - Page 15
in the hole to lock the shaft. • Place the blade (D) and support flange (F) on the output shaft. • Fit the nut (G). The nut (C) in the hole to lock the shaft. • Screw on the trimmer head/plastic blades (H) in the opposite direction to the direction of instructions in the reverse order. English - 15 - Husqvarna 323R-II | Owners Manual - Page 16
ASSEMBLY Adjusting the harness and clearing saw WARNING! When using a clearing saw it ! must always be hooked securely to the harness. Otherwise you will be unable to control the clearing saw safely and this can result in injury to yourself or others. Never use a harness with a defective - Husqvarna 323R-II | Owners Manual - Page 17
change your clothes. Wash any part of your body that has come the fuel cap and fuel lines. Transport and storage • Store supervision and when performing all service measures. WARNING! Take for four-stroke engines. • Mixing ratio 1:50 (2%) with HUSQVARNA two-stroke oil. Gasoline, litre 5 10 15 20 US - Husqvarna 323R-II | Owners Manual - Page 18
. Always move the machine away from the refuelling area before starting. • Clean the area around the fuel cap. Contamination in the tank can cause operating problems. • Ensure that the fuel is well mixed by shaking the container before filling the tank. 18 - English - Husqvarna 323R-II | Owners Manual - Page 19
are found. • Check that the support flange is not cracked due to fatigue or due to being tightened too much. Discard the support flange if it is cracked. metres. Starting • Check that the trimmer head and trimmer guard are not damaged or cracked. Replace the trimmer head or Primer bulb: Press the - Husqvarna 323R-II | Owners Manual - Page 20
when the cord is fully extended. This can damage the machine. Stopping Stop the engine by switching off the ignition. CAUTION! Do not put any part of your body in marked area. Contact can result in burns to the skin, or electrical shock if the spark plug cap has been damaged - Husqvarna 323R-II | Owners Manual - Page 21
TECHNIQUES General working instructions IMPORTANT! This section describes the basic safety precautions for working with clearing saws and trimmers. If you encounter a situation where you are uncertain how to proceed you should ask an expert. Contact your dealer or your service workshop. Avoid all - Husqvarna 323R-II | Owners Manual - Page 22
WORKING TECHNIQUES The ABC of clearing • Always use the correct equipment. • Make sure the equipment is well adjusted. • Follow the safety precautions. • Organise your work carefully. • Always use full throttle when starting to cut with the blade. • Always use sharp blades. • Avoid stones. • - Husqvarna 323R-II | Owners Manual - Page 23
WORKING TECHNIQUES conditions, so that cleared stems fall in the cleared area of the stand. 3 o'clock and 5 o'clock so that the direction of rotation of the blade pushes the bottom of the tree to the left. Forestry clearing using a saw blade • To fell a tree forwards, the bottom of the tree - Husqvarna 323R-II | Owners Manual - Page 24
brush the support cup instructions trimmer head just above the ground at an angle. It is the end of the cord that does the work. Let the cord work at its own pace. Never press the cord into the area to be cut. Grass clearing using a grass blade • Grass blades and grass cutters in a line, which makes - Husqvarna 323R-II | Owners Manual - Page 25
to constantly come into contact with the ground during normal cutting. Constant contact of this type can cause damage and wear to the trimmer head. Sweeping • The fan effect of the rotating cord can be used for quick and easy clearing up. Hold the cord parallel to and above - Husqvarna 323R-II | Owners Manual - Page 26
Husqvarna the running-in period, ask your dealer/ service workshop (who will have a rev counter • The basic carburetor settings are adjusted during testing at the factory. The basic setting is . • Now start the machine according to the starting instructions and let it warm up for 10 minutes. CAUTION! - Husqvarna 323R-II | Owners Manual - Page 27
jet H. You should therefore remove the cutting attachment, nut, support flange and drive disc before adjusting the high speed jet adjustment of the carburettor, contact a qualified dealer/service workshop that has a WARNING! If the idle speed cannot problems or too low a working speed. English - 27 - Husqvarna 323R-II | Owners Manual - Page 28
the cutting attachment stops, contact your dealer/service workshop. Do not use the machine until a week. This is best done with a wire brush. On mufflers without a catalytic converter the screen should to overheat and result in damage to the cylinder and piston. CAUTION! Never use a machine with - Husqvarna 323R-II | Owners Manual - Page 29
parts • Excessive fuel consumption. 1 The cooling system consists of: 1 Air intake on the starter. 2 Fins on the flywheel. 3 Cooling fins on the cylinder. 4 Cylinder cover (directs cold air over the cylinder). Clean the cooling system with a brush in oil. See instructions under the heading Oiling - Husqvarna 323R-II | Owners Manual - Page 30
factors cause deposits on the spark plug electrodes, which may result in operating problems and starting difficulties. If the machine is low on power, diffi can damage the piston/ cylinder. Note: Use only HUSQVARNA replacement parts. Use of other brands of replacement parts can cause damage to your - Husqvarna 323R-II | Owners Manual - Page 31
are described in the Maintenance section. The user must only carry out the maintenance and service work described in this manual. More extensive work must be carried out by an authorised service workshop. Maintenance Daily maintenance Clean the outside of the machine. X Check that the harness - Husqvarna 323R-II | Owners Manual - Page 32
data Engine Cylinder displacement, cu.in/cm3 Cylinder bore, inch , left/right handles, min.: At max. speed, left/right handles, max.: 323RII 327Rx 327RDx 1,55/25,4 1,34/34 1,06/27 2700 11000-11700 9300 0,9/ Zama C1Q 1,06/0,5 Zama C1Q 1,06/0,5 11,2/5,1 11,9/5,4 12,3/5,6 92/94 94/96 94/96 - Husqvarna 323R-II | Owners Manual - Page 33
Ø 25,4 mm Arbor shaft thread M10 Grass blade/grass cutter Grass 255-4 1" (Ø 255 4-teeth) Grass 255-8 1" (Ø 250 8-teeth) Saw blade Scarlet 200-22 1" (Ø 200 22 teeth) Plastic blades Tricut Ø 300 mm T25 Trimmer head S35 T35, T35x Support cup Fixed Cutting attachment guard, Art. no. 503 93 - Husqvarna 323R-II | Owners Manual - Page 34
off-road engine or a part has failed due to abuse, neglect, or improper maintenance or unapproved modifications. • You are responsible for presenting your small off-road engine to a Husqvarna Forest & Garden distribution center or service center as soon as the problem exists. The warranty repairs - Husqvarna 323R-II | Owners Manual - Page 35
husqvarna.com. WHERE TO GET WARRANTY SERVICE Warranty services or repairs are provided through all Husqvarna Forest & Garden authorized servicing dealers. MAINTENANCE, REPLACEMENT AND REPAIR OF EMISSION-RELATED PARTS Any replacement part maintenance, as defined in the operator's manual. English - 35 - Husqvarna 323R-II | Owners Manual - Page 36
- Husqvarna 323R-II | Owners Manual - Page 37
2,4-2,7 mm .095-.106" S35 1 4 2 5 3 8,5 m 28' 10 cm 4" 4,2 m 14' 6 7 8 "Clic" 10 11 15 cm 6" - Husqvarna 323R-II | Owners Manual - Page 38
S35 1 3 2 2,4-2,7 mm .095-.106" 4,25 m 14' 4 4,25 m 14' 5 15 cm 6" A B 15 cm 6" - Husqvarna 323R-II | Owners Manual - Page 39
2,4-2,7 mm .095-.106" T35, T35x 1 2 4 5 3 8,5 m 28' 10 cm 4" 4,3 m 14' 6 7 15 cm 6" 9 8 "Clic" - Husqvarna 323R-II | Owners Manual - Page 40
2,0-2,4 mm .079-.095" T25 1 4 2 5 3 6,0 m 18' 10 cm 4" 3,05 m 9' 6 7 15 cm 6" 9 8 "Clic" - Husqvarna 323R-II | Owners Manual - Page 41
Conditional Crankshaft Warranty for Commercial/Professional use when operated with Husqvarna XP 2 cycle oil (Parts & Labor). 2 Years 90 Days 90 Days 100 Series Trimmers, Stick Edgers, Hedge Trimmers Lifetime Ignition Warranty (Parts Only). Lifetime Shaft Warranty. 2 Years 1 Year 90 Days 200 - Husqvarna 323R-II | Owners Manual - Page 42
of the Owner s/Operator s manual. Should an operational problem or failure occur, the product should not be used. Failure caused by continued use is not covered by warranty. Product should be delivered, at owners expense, as is, to an authorized Husqvarna Servicing Retailer for evaluation. Proof of - Husqvarna 323R-II | Owners Manual - Page 43
1151420-95 ´´®®zz++SSJJ))¶¶55%%¨¨ 2008-12-15
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
 |
 |
English
323RII
327R
X-series
327RD
X-series
Oper
ator’s manual (EPA)
Please r
ead the operator’s manual carefully and make sure you understand the instructions
before using the machine.