Husqvarna 323R-II Owners Manual - Page 32

TECHNICAL DATA Technical data Technical data Engine Cylinder displacement, cu.in/cm3 Cylinder bore, inch/mm Stroke, inch/mm Idle speed, rpm Recommended max. fast idle speed, rpm Speed of output shaft, rpm Max. engine output, acc. to ISO 8893, kW/ rpm Catalytic converter muffler Speed-regulated ignition system Ignition system Manufacturer/type of ignition system Spark plug Electrode gap, inch/mm Fuel and lubrication system Manufacturer/type of carburetor Fuel tank capacity, US pint/litre Weight Weight without fuel, cutting attachment and guard, Lbs/kg Sound levels (see note 1) Equivalent sound pressure level at the user′s ear, measured according to ANSI B175.3-1997, dB(A), min/max: Vibration levels Vibration levels at handles, measured according to ANSI B175.3-1997, m/s2 At idle, left/right handles, min.: At idle, left/right handles, max.: At max. speed, left/right handles, min.: At max. speed, left/right handles, max.: 323RII 327Rx 327RDx 1,55/25,4 1,34/34 1,06/27 2700 11000-11700 9300 0,9/8400 Yes Yes 1,55/25,4 1,34/34 1,06/27 2700 11000-11700 9300 0,9/8400 Yes Yes 1,55/25,4 1,34/34 1,06/27 2700 11000-11700 9300 0,9/8400 Yes Yes Walbro MB Walbro MB Walbro MB Champion RCJ 6Y Champion RCJ 6Y Champion RCJ 6Y 0,02/0,5 0,02/0,5 0,02/0,5 Zama C1Q 1,06/0,5 Zama C1Q 1,06/0,5 Zama C1Q 1,06/0,5 11,2/5,1 11,9/5,4 12,3/5,6 92/94 94/96 94/96 2,1/2,0 2,7/2,8 3,2/2,8 4,8/4,4 1,7/1,9 2,0/2,0 2,4/1,8 7,2/8,2 1,7/1,9 2,0/2,0 2,4/1,8 7,2/8,2 Note 1: Equivalent noise pressure level is calculated as the time-weighted energy total for noise pressure levels under various working conditions with the following time distribution: 1/2 idle and 1/2 max. speed. NOTE! Noise pressure at the user's ear and vibration on the handles are measured with all the machine's approved cutting equipment fitted. The table indicates the highest and lowest values. 32 - English