Husqvarna 323R-II Owners Manual - Page 13

ASSEMBLY • Position the handlebar as shown. Fit the mounting components and tighten the knob lightly. • Push the attachment into the coupling until the attachment snaps into place. • Before using the unit, tighten the knob securely. • Put on the harness and hang the machine from the support hook. Now make a final adjustment so that the machine is in a comfortable working position when it hangs from the harness. Tighten the knob. Dismantling • Loosen the coupling by turning the knob (at least 3 times). Assembling and dismantling the two-piece shaft (327RDx) • Push and hold the button (C). While securely holding the engine end, pull the attachment straight out of the coupling. Assembly • Loosen the coupling by turning the knob. C • Align the tab of the attachment (A) with the arrow on the coupling (B). B A English - 13