Husqvarna 525RX Operation Manual - Page 12
Assembly
View all Husqvarna 525RX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Fitting the handlebar ASSEMBLY • Put on the harness and hang the machine from the support hook. Now make a final adjustment so that the machine is in a comfortable working position when it hangs from the harness. Tighten the knob. • Remove the screw at the rear of the throttle handle. • Slide the throttle handle onto the right side of the handlebar, (see diagram). Assembling and dismantling the two-piece shaft (525RK) • Align the screw hole in the throttle handle with the hole in the handlebar. • Refit the screw in the hole in the rear of the throttle handle. • Screw the screw through the handle and handlebar. Tighten it. • Unscrew the knob from the handlebar mounting. • Position the handlebar as shown. Fit the mounting components and tighten the knob lightly. Assembly • Loosen the coupling by turning the knob. • Align the tab of the attachment (A) with the arrow on the coupling (B). B A • Push the attachment into the coupling until the attachment snaps into place. • Before using the unit, tighten the knob securely. 12 - English