Husqvarna HU725AWDEX Operation Manual - Page 16
Service And Adjustments
View all Husqvarna HU725AWDEX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
SERVICE AND ADJUSTMENTS CAUTION: TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS: 1. Release control bar and stop engine. 2. Make sure the blade and all moving parts have completely stopped. 3. Disconnect spark plug wire from spark plug and place where it cannot come in contact with plug. LAWN MOWER TO ADJUST CUTTING HEIGHT See "TO ADJUST CUTTING HEIGHT" in the Operation section of this manual. REAR DEFLECTOR The rear deflector, attached between the rear wheels of your mower, is provided to minimize the possibility that objects will be thrown out of the rear of the mower into the operator's mowing position. Replace the rear deflector if damaged. TO REMOVE DRIVE BELT (See Figs. 20 & 21) NOTE: Before tipping lawn mower to remove drive belt, empty fuel tank by running engine until fuel tank is empty. 1. Turn lawn mower on its side with air filter and carbure- tor up. 2. Remove blade bolt, lockwasher, hardened washer and blade. 3. Remove debris shield. 4. Remove rear baffle. DRIVE COVER REAR BAFFLE DEBRIS SHIELD BLADE HARDENED WASHER LOCKWASHER BLADE BOLT FIG. 20 16