Husqvarna K 760 Owners Manual - Page 20

MAINTENANCE General WARNING! The user must only carry out the ! maintenance and service work described in this Operator's Manual. More extensive work must be carried out by an authorized service workshop. The engine should be switched off, and the stop switch in STOP position. Wear personal protective equipment. See instructions under the heading "Personal protective equipment". The life span of the machine can be reduced and the risk of accidents can increase if machine maintenance is not carried out correctly and if service and/or repairs are not carried out professionally. If you need further information please contact your nearest service workshop. • Let your Husqvarna dealer regularly check the machine and make essential adjustments and repairs. Maintenance schedule In the maintenance schedule you can see which parts of your machine that require maintenance, and with which intervals it should take place. The intervals are calculated based on daily use of the machine, and may differ depending on the rate of usage. Daily maintenance Cleaning External cleaning Cooling air intake Weekly maintenance Cleaning Monthly maintenance Cleaning Spark plug Fuel tank Functional inspection General inspection Throttle lockout* Stop switch* Guard for the blade* Cutting blade** Functional inspection Vibration damping system* Muffler* Drive belt Carburettor Starter *See instructions in the section "Machine's safety equipment". ** See instructions in the section "Cutting blades" and "Assembly and settings". Functional inspection Fuel system Air filter Drive gear, clutch 20 - English