Husqvarna RZ5424 Kohler Owners Manual - Page 53
Deck Outer Spindle, Engine Oil
View all Husqvarna RZ5424 Kohler manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
LUBRICATION Deck Outer Spindle Lubricate using a grease gun, one zerk, each side 2-3 strokes. Use only good quality bearing grease. WARNING! Engine oil can be very hot if it is drained directly after stopping the engine. Allow the engine to cool to a safe temperature before draining. Engine Oil Engine Oil Filter • Drain the engine oil in accordance with the work description under the heading Engine Oil/Change Engine Oil. • Remove the oil filter. If necessary, use a filter remover. • Wipe new, clean engine oil onto the seal for the new filter. • Mount the filter by hand with +¾ turn. • Run the engine warm, then check that there are no leaks around the oil filter seal. • Check the oil level in the engine, fill if necessary. The oil filter holds 0.1 qt (0.1 liters) of oil. Deck outer spindle (with belt shield removed) IMPORTANT INFORMATION Used engine oil is a health hazard and must not be disposed of on the ground or in nature; it should always be disposed of at a workshop or appropriate disposal location. Avoid skin contact; wash with soap and water in case of spills. Changing the oil filter 8061-025 8011-734 Husqvarna-53