IBM 2158240 Hardware Maintenance Manual - Page 107
Cover, Disconnect the tower power cord.
UPC - 087944482000
View all IBM 2158240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
Cover • Disconnect the system unit power cord. • Remove the screws at the back of the tower. • Insert a screwdriver under one of the tabs on the back of the cover and gently pry the tower cover so that it separates from the tower. • Slide the cover back about half inch (or 1.25 centimeters). • Lift the cover up by the top front and back edges, pulling the sides out and away from the tower. • Touch the outside of the bare metal frame of the tower to dissipate any static electricity from your body. Do not touch any of the components inside the frame. Be careful not to touch any component displaying a voltage warning label, such as the power supply. • Disconnect the tower power cord. NOTE: To prevent the tower from tipping over, you may want to lay the tower on its side on a work surface, such as a table. • Touch the bare metal frame of the system to dissipate any static electricity from your body (do not touch any of the components inside the frame until you have done this). Do not touch any component(s) with a voltage warning label. Repair Information 75