Icom GM800 Instruction Manual - Page 46
Select Call Frequency., Push [Call]
View all Icom GM800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
7 DSC OPERATION ■ Sending a Distress call D Sending a Distress Relay call (continued) 8. Select "Call Frequency." Rotate CH/GRP + Push 9. Select an option. (Example: 2187.5 kHz) Rotate CH/GRP + Push 11. After sending, the following screen is displayed. See page 29 for details of the software key function in the DSC Task mode. 12. Hold down [PTT] to communicate with a coast station. 13. Push [Standby Mode] to return to the Standby mode. 10. Push [Call] to send the Distress Relay call. Push 41
41
7
DSC OPERATION
D
Sending a Distress Relay call (continued)
8. Select “Call Frequency.”
9. Select an option.
(Example: 2187.5 kHz)
10. Push [Call]
to send the Distress Relay call.
11. After sending, the following screen is displayed.
See page 29 for details of the software key function
in the DSC Task mode.
12. Hold down [PTT] to communicate with a coast
station.
13. Push [Standby Mode]
to return to the
Standby mode.
Rotate
+
Push
CH/GRP
Rotate
+
Push
CH/GRP
Push
■
Sending a Distress call