Icom GM800 Instruction Manual - Page 57
Sending a Polling Request acknowledgement, Sending a Test call
View all Icom GM800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
7 DSC OPERATION Quick Reference D Sending a Polling Request acknowledgement When a Polling Request is received, you can send an acknowledgement. 1. When a Polling Request call is received: • Alarm sounds. • The following screen is displayed. Push any [Alarm Off] . 2. Push [Accept] . Push any Push • Enters the DSC Task mode. 3. Push [≈] to scroll the software key function. 4. Push [ACK] . Push • The call contents screen is displayed. • Rotate [CH/GRP] to confirm the contents. 5. Push [Call] to send the Polling Request acknowledgement. 1 Push 2 • Your position data and time are transmitted. 6. Push [Standby Mode] to return to the 3 Standby mode. 4 D Sending a Test call Testing on the exclusive DSC Distress and Safety 5 calling frequencies should be avoided as much as possible by using other methods. Normally the test call would require no further 6 communications between the 2 stations involved. 7 1. Push [Compose Non-Distress] . 8 9 10 Push 11 To display the screen from the Menu screen: ([MENU] > Compose Non-Distress) 12 2. Select "Message Type." 13 Rotate 14 CH/GRP + 15 Push 16 17 ► Continued on the next page. 52