Icom IC-FR5000 Instruction Manual
Icom IC-FR5000 Manual
 |
View all Icom IC-FR5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Icom IC-FR5000 manual content summary:
- Icom IC-FR5000 | Instruction Manual - Page 1
INSTRUCTION MANUAL VHF FM REPEATER |FR5000 |FR5100 UHF FM REPEATER |FR6000 |FR6000-L |FR6100 - Icom IC-FR5000 | Instruction Manual - Page 2
when a channel extension module is installed. SAVE THIS INSTRUCTION MANUAL- This manual contains important safety and operating instructions for the IC-FR5000/IC-FR5100/IC-FR6000/ IC-FR6000-L/IC-FR6100 vhf/uhf fm repeaters. EXPLICIT DEFINITIONS Built-in 5-Tone, DTMF encoder & decoder Multiple - Icom IC-FR5000 | Instruction Manual - Page 3
to this repeater, not expressly approved by Icom Inc., could void your authority to operate this repeater under FCC n Receiving and transmitting 7 D Repeater operation 7 D Base station operation 7 3. OPERATION 7 4. MAINTENANCE AND OPTIONS 8 n Troubleshooting 8 n Options 8 5. ABOUT - Icom IC-FR5000 | Instruction Manual - Page 4
switch. Electromagnetic Interference/Compatibility During transmissions, your Icom radio generates RF energy that can possibly cause interference . Émettre pendant plus de 50% du temps total d'utilisa- 2. IC-FR5000: tion peut causer une exposition aux RF supérieure aux Transmettre que - Icom IC-FR5000 | Instruction Manual - Page 5
Technology is explicitly prohibited if not installed and used in accordance with the from attempting to extract, remove, decompile, re- instruction manual, may cause harmful interference verse engineer, or disassemble the Object Code, or in to radio communications. Operation of this equipment - Icom IC-FR5000 | Instruction Manual - Page 6
(Front panel view) u Ground i Input port for PC programming i POWER SWITCH [POWER] ➥ Push to turn ON the repeater power. ➥ Hold down for 3 seconds to turn OFF the repeater power. When a channel extension module is installed: ➥ While the repeater power is turned ON, push to select the desired - Icom IC-FR5000 | Instruction Manual - Page 7
PANEL DESCRIPTION D Function display q w e rt ICOM Inc. y q SIGNAL STRENGTH INDICATOR Indicates relative signal fans) r A CCESSORY CONNECTOR [ACC] (May not be installed, depending on the repeater Connects to the accessory connector. 14 version.) • See page 3 for accessory connector - Icom IC-FR5000 | Instruction Manual - Page 8
25 Function assignable.*1 (Default: Mic Hanger Output) +5 V pull up, Active=L *1 The desired function can be assigned using the optional CS-FR5000 cloning software. Ask your dealer for details. *2 (For the European versions) Input impedance: 2.7 kΩ Input level: 85 mV rms (for 60% deviation) NOTE - Icom IC-FR5000 | Instruction Manual - Page 9
or dealer. Keep the shipping cartons. For a description and a diagram of accessory equipment included with the repeater, see 'SUPPLIED ACCESSORIES' on page i of this manual. For radio communications, the antenna is a critical component, along with output power and sensitivity. Select antenna - Icom IC-FR5000 | Instruction Manual - Page 10
programming CAUTION: DO NOT short pin 1 to ground as this can damage the internal 8 V regulator. DC voltage is applied to pin 1 for microphone operation. Only Icom be required, depending on the repeater version. The repeater rear panel may be different, depending on the repeater version. *2 13.2 V for - Icom IC-FR5000 | Instruction Manual - Page 11
installation should look like the illustration below. P0 P1 P2 P3 P4 n Fuse replacement If a fuse blows, or the repeater stops functioning, find the source of the problem, repair it and then replace the damaged fuse with a new rated one. D Line fuse replacement CAUTION: DO NOT replace - Icom IC-FR5000 | Instruction Manual - Page 12
due to long periods of transmitting to reduce the transmit output power level. The output power will return to its normal level when the repeater has cooled down. D Base station operation Receiving q Push [POWER] to turn ON the power. w Set the audio and squelch levels. ➥ Rotate [SELECT]*1 fully - Icom IC-FR5000 | Instruction Manual - Page 13
Troubleshooting The following chart is designed to help you correct problems that are not equipment malfunctions. If you are unable to locate the cause of a problem or solve it through the use of this chart, contact your nearest Icom Dealer or Service Center. PROBLEM CS-FR5000 cloning software. Ask - Icom IC-FR5000 | Instruction Manual - Page 14
, feeder, RF amplifier and other passive or active devices used in the installation. The RF output power of this repeater is 25 watts. The figures contained in this guide are based on the recommended limits for the general public and are obtained by 'worst case' numerical analysis. For a definitive - Icom IC-FR5000 | Instruction Manual - Page 15
and a height clearance of 3 m. Hereby, Icom Inc. declares that the 3 versions of IC-FR5100 and IC-FR6100 which have the "CE" symbol on conformity is available at the following internet address: 7 https://www.icomjapan.com/support/ 8 then the antenna could be mounted on top of a short mast - Icom IC-FR5000 | Instruction Manual - Page 16
A6635H-1EX-11 Printed in Japan © 2007-2020 Icom Inc. Nov. 2020 1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
 |
 |
INSTRUCTION MANUAL
VHF FM REPEATER
|FR5000
|FR5100
UHF FM REPEATER
|FR6000
|FR6000-L
|FR6100