Icom IC-FR5000 Instruction Manual - Page 2

Thank you for choosing this Icom product. This product is designed and built with Icom' s state of the art technology and craftsmanship. With proper care, this product should provide you with years of trouble-free operation. IMPORTANT READ THIS INSTRUCTION MANUAL CAREFULLY before attempting to operate the re- peater. D FEATURES Up to 2 channels of operation You can install a channel extension module (optional UR-FR5000/UR-FR5100/ UR-FR6000/UR-FR6100) into a repeater. 2 channels can be operated on the same repeater when a channel extension module is installed. SAVE THIS INSTRUCTION MANUAL- This manual contains important safety and operating instructions for the IC-FR5000/IC-FR5100/IC-FR6000/ IC-FR6000-L/IC-FR6100 vhf/uhf fm repeaters. EXPLICIT DEFINITIONS Built-in 5-Tone, DTMF encoder & decoder Multiple signaling systems are built-in as standard. These systems are fully compatible with Icom F-series radios. DTMF remote control capability You can control the repeater from a remote location over the air or over a phone line with DTMF. WORD DEFINITION RWARNING! Personal injury, fire hazard or electric shock may occur. CAUTION Equipment damage may occur. NOTE If disregarded, inconvenience only. No risk of personal injury, fire or electric shock. D-Sub 25 pin ACC port equipped You can use optional equipment through the D-sub 25 pin ACC port on the repeater's rear panel. SUPPLIED ACCESSORIES Online control and Digital Trunking operation (May not be usable for some versions.) Online control and digital trunking operation are available when the optional UC-FR5000 trunking/ network controller is installed in the repeater. The following accessories are supplied. Handles For handles attachment Spacers Other features - Wide frequency coverage IC-FR5000/IC-FR5100: 136 to 174 MHz IC-FR6000: 350 to 400 MHz, 400 to 470 MHz, 450 to 512 MHz, 450 to 520 MHz IC-FR6000-L: 350 to 400 MHz IC-FR6100: 400 to 470 MHz - PC programmable - 19 inch rack mount - Optional UT-109R/UT-110R voice scrambler unit for base operating mode Icom is not responsible for the destruction or damage to the Icom repeater, if the malfunction is because of: • Force majeure, including, but not limited to, fires, earthquakes, storms, floods, lightning, other natural disasters, disturbances, riots, war, or radioactive contamination. • The use of Icom repeaters with any equipment that is not manufactured or approved by Icom. i Screws DC power cable (OPC-1784) Function name stickers*1 KEY SEAL DC power cable (CAB-1149)*2 *1 Used for labelling the programmable function keys according to their assinged functions. *2 Not supplied, depending on the repeater version. Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated (Japan) in Japan, the United States, the United Kingdom, Germany, France, Spain, Russia, Australia, New Zealand, and/or other countries. All other products or brands are registered trademarks or trademarks of their respective holders.