Icom IC-FR5000 Instruction Manual - Page 6

1 PANEL DESCRIPTION n Front panel r Function t q w display e y P0 P1 P2 P3 P4 q INTERNAL SPEAKER Outputs the received audio. w VOLUME CONTROL [VOLUME] (p. 7) Adjusts the audio output level. e SELECTOR DIAL [SELECT] Rotate to adjust the squelch threshold level, select the operating channel. (Depending on the presetting.) r POWER INDICATOR [POWER] ➥ Lights green at 'A' module's indicator while the repeater power is turned ON. When a channel extension module is installed: ➥ Lights green at the selected module indicator ('A' or 'B') while the repeater power is turned ON. ➥ Lights orange at the un-selected module indicator ('A' or 'B') while the repeater power is turned ON. t TRANSMIT INDICATOR [TX] Lights red while transmitting. y BUSY INDICATOR [BUSY] Lights green while receiving a signal or when the noise squelch is open. About [PWR], [TX] and [BUSY] indicators: 'A' and 'B' modules indicators are usable for these indications. 'A' module's indicator corresponds to the original module, and 'B' module's indicator corresponds to an extended module. o iu u MICROPHONE CONNECTOR [MIC] This 8-pin modular jack accepts an optional micro- phone. KEEP the [MIC] connector cover attached to the repeater when an optional microphone is not used. q +8 V DC output (Max. 15 mA) w Output port for PC programming q i e NC r M PTT (Input port for TX control) t Microphone ground y Microphone input (Front panel view) u Ground i Input port for PC programming i POWER SWITCH [POWER] ➥ Push to turn ON the repeater power. ➥ Hold down for 3 seconds to turn OFF the repeater power. When a channel extension module is installed: ➥ While the repeater power is turned ON, push to select the desired module to operate the repeater as the base station. • The power indicator of the selected module unit lights green. o DEALER-PROGRAMMABLE KEYS Desired functions can be independently preset by your dealer. Ask your dealer for details. • Because these keys are programmable, the functions are unique to each unit. 1