Icom IC-M506 Instruction Manual - Page 123
Troubleshooting
View all Icom IC-M506 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
16 TROUBLESHOOTING PROBLEM POSSIBLE CAUSE SOLUTION REF. 1 The transceiver does • Bad connection to the power supply. • Check the connection to the transceiver and p. 101 2 not turn ON. Little or no sound comes • Squelch level is set too high. power supply. • Set the squelch to the threshold point. p. 3 3 from the speaker. • Volume level is set too low. • Set the volume to a suitable level. p. 4 4 • Speaker has been exposed to water. • Remove the water with the AquaQuake func- p. 15 tion. 5 Transmitting is impossi- • S ome channels are programmed for low • Change channels. pp. 9, 6 ble, or high power can- power or receive only by regulations. not be selected. • The output power is set to low. • Push [HI/LO] to select high power. 10, 11 p. 11 7 Scan does not start. • M ore than 2 favorite channels are not pro- • S et the desired channels as Favorite chan- p. 17 8 No beep sounds. grammed. • Beep tones are turned OFF. nels. 9 • T urn the beep tones ON in the CONFIGURA- p. 93 TION menu. 10 Distress calls cannot be • M MSI (DSC self ID) code is not pro- • P rogram the MMSI (DSC self ID) code. p. 8 11 transmitted. grammed. Does not record or does • T he memory IC is not working. not record properly. 12 • T he memory IC should be replaced. - Ask your service center or technical dealer 13 for details. 14 15 16 114