Icom IC-M506 Instruction Manual - Page 14
Function display
View all Icom IC-M506 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
2 PANEL DESCRIPTION ■■Function display q w e r t y u i o !0 @0 !9 !8 !7 !1 !6 !2 !5 !3 !4 q BUSY/TRANSMIT ICON (pp. 11, 12) ➥➥ The " " icon appears when receiving a signal or when the squelch is open. ➥➥ The " " icon appears while transmitting. w POWER ICON (p. 11) ➥➥ The "25W" icon appears when high power is selected. ➥➥ The "1W" icon appears when low power is selected. e RX HAILER ICON (p. 75) Appears while in the RX Hailer mode. r CHANNEL GROUP ICON (p. 10) ➥➥ The selected channel group icon, USA "USA," International "INT" or Canadian "CAN" appears. ➥➥ The "WX" icon appears when the weather channel is selected. 5 t CALL CHANNEL ICON (p. 9) Appears when the Call channel is selected. y DUPLEX ICON (p. 10) Appears when a duplex channel is selected. u FAVORITE CHANNEL ICON (p. 17) Appears when a Favorite (Tag) channel is selected. i MESSAGE ICON Blinks when there is an unread DSC message. o GPS ICON ➥➥ Stays ON when the GPS receiver is activated and valid position data is received. ➥➥ Blinks when invalid position data is being received. !0 SWITCH ICON (p. 69) Appears when the "CH 16 SWITCH" in DSC Settings is set to OFF. !1 LOW BATTERY ICON Blinks when the battery voltage drops to approximately 10.8 V DC or less. !2 CHANNEL NUMBER READOUT Shows the selected operating channel number. • W hen a simplex channel is selected, "A" or "B" appears. !3 CHANNEL NAME FIELD The channel name appears, if programmed. (p. 13)