Icom IC-U86 Advanced Manual - Page 25

Setting skip channels, Scan resume setting, Tone/DTCS squelch

Get Icom IC-U86 PDF manuals and user guides View all Icom IC-U86 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 25 highlights

6 SCAN OPERATION Setting skip channels The Memory Skip function speeds up scanning by not scanning those memory channels set as skip channels. Set skip channels as follows. 1. Push [VFO/MR/CALL] several times to select the memory mode. 2. Push [Y] or [Z] to select the memory channel to be skipped. 3. Push [FUNC], and then push [SKIP] to set the channel as a skip channel. •• "SKIP" is displayed. Example: Setting memory channel 11 as the skip channel. Push or to select channel 11. Push , and push . Scan resume setting Various pause and timer options can be selected with the Scan Resume function. The selected resume option is also used for Priority Watch. 1. Push [FUNC], and then push [SET] to enter the Set mode. 2. Push [Y] or [Z] to select the scan pause timer item (SCt, or SCP). 3. Rotate [VOL] to select the desired scan resume option. •• "SCt. 5/10/15": Timer scan The scan pauses for 5 to 15 seconds, when a signal is received. •• "SCP. 2": Pause scan The scan pauses, then resumes 2 seconds after the signal disappears. 4. Push [# ENT] to exit the Set mode. Displayed The "Scan pause timer" item in the Set mode (Pause scan is selected.) (Timer scan (15 seconds) is selected.) 6-3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
6
SCAN OPERATION
6-3
Example: Setting memory channel 11 as the
skip channel.
Push
to select channel 11.
or
Push
, and push
.
Displayed
The “Scan pause timer” item in the Set mode
(Pause scan is selected.)
(Timer scan (15 seconds) is selected.)
The Memory Skip function speeds up scanning by
not scanning those memory channels set as skip
channels. Set skip channels as follows.
1.
Push [VFO/MR/CALL] several times to select the
memory mode.
2. Push [
Y
] or [
Z
] to select the memory channel to
be skipped.
3.
Push [FUNC], and then push [SKIP] to set the
channel as a skip channel.
•
“SKIP” is displayed.
Various pause and timer options can be selected with
the Scan Resume function. The selected resume
option is also used for Priority Watch.
1.
Push [FUNC], and then push [SET] to enter the
Set mode.
2. Push [
Y
] or [
Z
] to select the scan pause timer
item (SCt, or SCP).
3.
Rotate [VOL] to select the desired scan resume
option.
•
“SCt. 5/10/15”:
Timer scan
The scan pauses for 5 to 15
seconds, when a signal is
received.
•
“SCP. 2”:
Pause scan
The scan pauses, then resumes
2 seconds after the signal
disappears.
4.
Push [# ENT] to exit the Set mode.
Setting skip channels
Scan resume setting