Icom IC-V8000 Instruction Manual - Page 44
Memory bank setting
View all Icom IC-V8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
5 MEMORY OPERATION Memory bank setting q Push [M/CALL(PRIO)] to select memory mode, then select the desired memory channel via the tuning dial. w Push [BANK(OPT indication blinks as follows. e Push [BANK(OPT)] again to set the channel to bank setting stand-by condition. • "- -" indication blinking stops. r Push [MW(S.MW)] then rotate the tuning dial to select the desired bank to be set. • "M" and bank initial blink as follows. t Push [MW(S.MW)] again to set the channel into the bank. • "M" and bank initial blinking stops. y Push [BANK(OPT)] twice to return to regular memory condition. u Repeat steps q to y to set another memory channel into the same or another bank. z Push [MR/CALL] then select the desired BANK/OPTION memory channel via [Y]/[Z] or keypad. x Push [BANK/OPTION]. • "- -" indication blinks. MW c Push [BANK/OPTION] again to set the channel to bank setting stand-by condition. [Y]/[Z] • "- -" indication stops blinking. v Push [FUNC] then [CLR A(MW)] then push [Y]/[Z] to select the desired bank to be set. • "M" and bank initial blink. b Push [CLR A(MW)] to set the channel into the bank. • "M" and bank initial stops blinking. n Push [BANK/OPTION] twice to return to regular memory channel condition. m Repeat steps z to n to set an another memory channel into the same or another bank. 33