Icom ID-52A Installation Guide For Windows 11/10/8.1 - Page 5

4. FOR YOUR REFERENCE After the PC and radio are connected, you can remotely control the radio using the CI-V commands. The radio has a conversion function between USB and Serial. 4-1 COM Port setting To change the COM Port number setting after you have installed the USB driver, connect the radio to the PC first, and then turn ON the device. 1. Right-click Windows icon, and then click [Device Manager]. 3. Click the [Port Settings] tab, and then click . 2 Click 1 Click 2 Click 4. Select the COM port number, and then click . 2 Click 1 Select 1 Right-click 2. Right-click "IC-705 Serial Port A (CI-V) (COM)," and then click "Properties." The COM port number is displayed instead of "." If the radio has two COM ports, two COM port numbers are displayed. 5. Click to close the screen. 1 Right-click 2 Click Click After changing the COM port number, you may not be able to immediately use the selected COM port number. In this case, disconnect the USB cable once, and then reconnect the cable. 5