Icom M424G Instruction Manual - Page 86
Connect To The Ma-500tr, Dc Power Connector, Ground Terminal
View all Icom M424G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
9 CONNECTIONS AND MAINTENANCE ■ Connections (Continued) q t r w e r DC POWER CONNECTOR Connects to a 13.8 V DC power source. CAUTION: After connecting the DC power cable, NMEA leads or external speaker leads, cover the connector and leads with a vulcanizing tape, as shown below, to prevent water seeping into the connection. Rubber vulcanizing tape DDConnect to the MA-500TR Connect the transceiver to the high-density D-Sub 15-pin connector of the MA-500TR using the OPC-2014* cable. After connecting, an Individual DSC call can be made to the AIS target using the transponder without entering the target's MMSI code. * The OPC-2014 is supplied with the MA-500TR • Listener A (Data-H) lead (Yellow): Connects to lead 3 of the OPC-2014. • Listener B (Data-L) lead (Green): Connects to lead 2 of the OPC-2014. • Talker A (Data-H) lead (White): Connects to lead 5 of the OPC-2014. • Talker B (Data-L) lead (Brown): Connects to lead 4 of the OPC-2014. t GROUND TERMINAL Connects to a vessel ground to prevent electrical shocks and interference from other equipment occurring. Use a PH M3 × 6 screw (user supplied). 76