Icom M93D Instruction Manual

Icom M93D Manual

Get Icom M93D PDF manuals and user guides View all Icom M93D manuals
Add to My Manuals
Save this manual to your list of manuals

Icom M93D manual content summary:

  • Icom M93D | Instruction Manual - Page 1
    INSTRUCTION MANUAL VHF MARINE TRANSCEIVER iM93D iM93D EURO This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference.
  • Icom M93D | Instruction Manual - Page 2
    years of trouble-free operation. IMPORTANT READ ALL INSTRUCTIONS carefully and completely before using the transceiver. SAVE THIS INSTRUCTION MANUAL-This instruction manual contains important operating instructions for the IC-M93D and IC-M93D EURO. This instruction manual includes some functions
  • Icom M93D | Instruction Manual - Page 3
    IN CASE OF EMERGENCY If your vessel requires assistance, contact other vessels and the Coast Guard by sending a distress call on Channel 16. USING CHANNEL 16 DISTRESS CALL PROCEDURE 1. "MAYDAY MAYDAY MAYDAY." 2. "THIS IS name of vessel). 3. Say your call sign or other indication of the vessel (AND
  • Icom M93D | Instruction Manual - Page 4
    , and below -15°C (-10°C for the Australian version) or above +55°C for the IC-M93D EURO. The basic operations of the transceiver are guaranteed within the specified operating temperature range. However, the Liquid Crystal Display may not operate correctly, or show an indication in the case of long
  • Icom M93D | Instruction Manual - Page 5
    you actually intend to transmit. BE CAREFUL! The IC-M93D and IC-M93D EURO meet IPX7* requirements for waterproof protection. However, jack cover is damaged, the transceiver/battery pack is cracked Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated (Japan) in Japan, the
  • Icom M93D | Instruction Manual - Page 6
    transceiver, not expressly approved by Icom Inc., could void your authority in accordance with the COUNTRY CODE LIST instruction manual, may cause harmful interference to radio all electrical and electronic products, batteries, and accumulators (rechargeable batteries) must be taken to
  • Icom M93D | Instruction Manual - Page 7
    RULES 1 2. SUPPLIED ACCESSORIES AND ATTACHMENTS 2-3 ■■ Supplied accessories 2 ■■ Attachments 2 BATTERY CHARGING 59-62 ■■ Regular battery charger 61 ■■ Optional battery charger 62 12. OPTIONAL SPEAKER MICROPHONE 63 ■■ About the HM-165 63 ■■ Attaching the HM-165 63 13. TROUBLESHOOTING
  • Icom M93D | Instruction Manual - Page 8
    hand it is your responsibility to be thoroughly acquainted with all pertinent rules and regulations. NOTE: Even though the transceiver is capable of operation on VHF marine channels 3, 21, 23, 61, 64, 81, 82 and 83, according to FCC regulations these simplex channels cannot be lawfully used by the
  • Icom M93D | Instruction Manual - Page 9
    AND ATTACHMENTS ■■Supplied accessories Handstrap Battery pack Battery charger Power adapter* (with 2 screws) Cigarette lighter cable* Antenna Belt clip *M ay not be supplied, or different type may be supplied, depending on the transceiver
  • Icom M93D | Instruction Manual - Page 10
    2 SUPPLIED ACCESSORIES AND ATTACHMENTS ■■Attachments (Continued) DDHandstrap Pass the handstrap through the loop on the back side of the transceiver to make it easy to carry. DDBelt
  • Icom M93D | Instruction Manual - Page 11
    3 PANEL DESCRIPTION ■■Panel description 1 !1 !0 e UP/DOWN/LEFT/RIGHT KEYS 2 zzPush [▲] or [▼] to select the operating channel, Menu 3 items, Menu settings, and so on. Microphone zzPush [◄] or [►] to slide through the key functions that 4 are assigned to the software keys. (p. 7) zz
  • Icom M93D | Instruction Manual - Page 12
    3 PANEL DESCRIPTION ■■Panel description (Continued) !1 !0 o SOFTWARE KEYS Slide through the key functions by pushing [◄] or [►], and then push either of the 3 software keys to select the function displayed at the bottom of the display. See "Software keys" on o page 7 for details. ■■Display
  • Icom M93D | Instruction Manual - Page 13
    " 9 data is received, or when manually entered. Received GPS data blinks if no GPS data is received for 30 seconds after receiving valid GPS data, and then "??" and a warning message ••Blinks when the "DSC Switch" is OFF. !3 BATTERY INDICATOR Displays the battery's remaining power. 10 11 are
  • Icom M93D | Instruction Manual - Page 14
    3 PANEL DESCRIPTION ■■Using the software keys Various often-used functions are assigned to the software keys for easy access. The functions' icons are displayed above the software keys, as shown below. DDSelecting a software key function 1. Push [◄] or [►] to slide through the selectable functions
  • Icom M93D | Instruction Manual - Page 15
    High/Low Push to set the power to high or low. LSome channels are set to only low power. (p. 5) Channel/Weather channel (p. 11~12) Push to select regular channels or Weather* channels. L is displayed except for the USA, Australian, and Export versions. LWhile the Call channel or Channel 16 is
  • Icom M93D | Instruction Manual - Page 16
    4 PREPARATIONS ■■Entering the MMSI code The Maritime Mobile Service Identity (MMSI: DSC self ID) code consists of 9 digits. You can only enter the code when turning ON the transceiver for the first time. This
  • Icom M93D | Instruction Manual - Page 17
    PREPARATIONS 4 ■■Entering the ATIS ID (For Dutch and German versions) 1 The Automatic Transmitter Identification System (ATIS) ID consists of 10 digits. You can enter the ID in the "ATIS ID 2 4. Repeat step 3 to enter all 10 digits. 5. Push the software key below [DONE] to set the entered 3
  • Icom M93D | Instruction Manual - Page 18
    5 BASIC OPERATIONS ■■Selecting a channel NOTE: Before using the transceiver for the first time, the battery pack must be fully charged for optimum life and operation. To avoid damage to the transceiver, turn OFF the transceiver before charging. DDChannel 16 Channel
  • Icom M93D | Instruction Manual - Page 19
    Administration (NOAA). The transceiver automatically detects a Weather alert tone 4 USA    on the selected weather channel, or while scanning. 5 UK European Dutch German         Selecting a Weather channel 1. Push the software key below [CH/WX] on the software key
  • Icom M93D | Instruction Manual - Page 20
    5 BASIC OPERATION ■■Adjusting the volume level ■■Setting the Call channel 1. Push [VOL/SQL]. ••The volume level adjustment screen is displayed. 2. Push [◄] or [►] to adjust the volume level between 1 and 20, or OFF. LYou can also push the software key below [MUTE] to select OFF, or below [LOUD
  • Icom M93D | Instruction Manual - Page 21
    Power Save function 3 automatically turns ON when no signal is received for 5 seconds. 4 ••When the temperature is extremely high, the battery 5 protection function automatically sets transceiver power to Low, and disables High power selection. 6 ••Except for the Export version, the Time
  • Icom M93D | Instruction Manual - Page 22
    operating channel and weather channel, using numbers, uppercase letters, symbols, and a space. This enables easy recognition of the channels or stations. All VHF marine channels are set with default names. 1. Push [▲] or [▼] to select the channel to edit. 2. Push [◄] or [►] to select . LYou cannot
  • Icom M93D | Instruction Manual - Page 23
    6 SCAN (Exept for the Dutch version) ■■Scan types 1 You can find ongoing calls by scanning the Favorite channels. 2 Before starting a scan, you need to: Priority Scan 3 ••Set the channels that you want to scan as Favorite channels. (p. 17) The Priority Scan sequentially searches through
  • Icom M93D | Instruction Manual - Page 24
    6 SCAN (Except for the Dutch version) ■■Setting Favorite channels You can quickly recall often-used channels by setting them as Favorite channels. You can set Favorite channels in each Channel Group. 1. Select a Channel Group. (p. 12) 2. Push [▲] or [▼] to select the channel you want to set as a
  • Icom M93D | Instruction Manual - Page 25
    7 DUALWATCH/TRI-WATCH (Except for the Dutch version) ■■Description ■■Operation 1 Dualwatch and Tri-watch are convenient to monitor Channel 1. Select Dualwatch or Tri-watch in "Radio Settings." 2 16 while you are operating on another channel. (p. 55) 3 2. Push [▲] or [▼] to select a
  • Icom M93D | Instruction Manual - Page 26
    8 DSC OPERATION ■■DSC address ID DDEntering an Individual ID You can enter a total of 75 Individual IDs, and assign names of up to 10 characters. 1. Display the "Individual ID" screen. [MENU] ► "DSC Settings" ► "Individual ID" ••"No ID" is displayed if no ID is entered. 2. Push the software key
  • Icom M93D | Instruction Manual - Page 27
    Individual ID or Group ID 2 You can enter a total of 25 Group IDs, and assign names of [Example: Deleting an Individual ID: ICOM #2] 3 up to 10 characters. 1. Display the "Individual ID" screen. 4 1. Display the "Group ID" screen. [MENU] ► "DSC Settings" ► "Individual ID" 5 [MENU] ► "DSC
  • Icom M93D | Instruction Manual - Page 28
    include the vessel's position and time. If no GPS data is received, manually enter the position and Universal Time Coordinated (UTC) time. NOTE: ••The manual entry is disabled while the GPS data is received. ••The manually entered position and time is valid only for 4 hours, or until turning
  • Icom M93D | Instruction Manual - Page 29
    the 9 operating screen. 10 TIP: A default Distress alert contains: 11 ••Nature of distress: Undesignated distress ••Position information: The latest GPS, or manually input 12 position, which is held for 4 hours or until turning OFF the 13 transceiver. 14 NOTE on Distress calls (Simple
  • Icom M93D | Instruction Manual - Page 30
    8 DSC OPERATION DDRegular call Select the nature of the Distress call to include in the Regular Distress call. 1. Push the software key below . ••The "Distress Call" screen is displayed. 2. Push [▲] or [▼] to select the nature of the call, and then push [ENT]. (Example: Flooding) ••The
  • Icom M93D | Instruction Manual - Page 31
    NOTE (For USA and Export versions): After sending a Distress call without position data ••While waiting for an Acknowledgement, if valid position data is received, the transceiver will automatically send a Distress call again. ••Even after exiting the DSC mode, if valid position data is received
  • Icom M93D | Instruction Manual - Page 32
    Individual Call" screen is displayed. 4. Select the station to send an Individual call to, and the push [ENT]. LYou can also select "Manual Input" to manually enter the calling station. 5. Select a channel to assign, and then push [ENT]. LThe assigned channels are preset by default. 25 6. Push
  • Icom M93D | Instruction Manual - Page 33
    Acknowledgement "Unable to comply" Push any software key to turn OFF the alarm. ••The Acknowledge information is displayed. LPush the software key below [EXIT] to return to the operating screen. DSC OPERATION 8 1 DDSending an Individual Acknowledgement 2 When you have received an Individual
  • Icom M93D | Instruction Manual - Page 34
    8 DSC OPERATION DDSending an Individual Acknowledgement (Continued) 4. Select "Able to Comply," "Unable to Comply," or "Propose New CH." • Able to Comply: Sends an Acknowledgement call without any changes. • Unable to Comply: S ends an Acknowledgement call but cannot communicate. •
  • Icom M93D | Instruction Manual - Page 35
    ]. ••The "Group Call" screen is displayed. 4. Select the group to send a Group call to, and the push [ENT]. LYou can also select "Manual Input" to manually enter the target group. 5. Select the channel to assign, and then push [ENT]. LThe assigned channels are preset by default. DSC OPERATION
  • Icom M93D | Instruction Manual - Page 36
    , you can send a call to all ships that carry DSC transceivers and to those that use Channel 70 as their listening channel in the range. 1. Push [◄] or [►] to display . 2. Push the software key below . ••The "Compose Other" screen is displayed. LYou can also display the "Compose Other" screen by
  • Icom M93D | Instruction Manual - Page 37
    then push [ENT]. ••The "Test Call" screen is displayed. 4. Select the station to send the Test call to. LYou can also select "Manual Input" to manually enter the calling station. 1 5. Push the software key below [CALL] to send the Test call. ••"Transmitting Test Call" is displayed. 2 LIf
  • Icom M93D | Instruction Manual - Page 38
    , when you receive a Test call, the Auto ACK function automatically sends an Acknowledgement to the calling station (p. 42). If the function is set to "Manual," do the following steps to send an Acknowledgement. 1. After a Test call is being received, push any software key to turn OFF the alarm
  • Icom M93D | Instruction Manual - Page 39
    DSC OPERATION 8 Sending on the "Compose Other" screen You can also send a Test Acknowledgement by selecting "Test ACK" on the "Compose Other" screen. This enables you to resend an Acknowledgement, or send even after ignoring the call when you first received it. 1. Push the software key below . ••
  • Icom M93D | Instruction Manual - Page 40
    8 DSC OPERATION DDSending a Position Reply call (Continued) 4. Select the reply "Able to Comply." LSelect "Unable to Comply" if you cannot send a reply call. 5. Push the software key below [CALL] to send the reply. ••"Transmitting Position Reply" is displayed. ••After sending, the replied
  • Icom M93D | Instruction Manual - Page 41
    calls. LWhen you receive a call, an emergency alarm sounds. L[PAUSE] is not displayed if the "CH Auto Switch" item is set to 3 "Manual." (p. 42) NOTE: The screens that are displayed when a Distress call or an Acknowledgement call is received slightly differ ••Pauses the countdown until the
  • Icom M93D | Instruction Manual - Page 42
    8 DSC OPERATION ■■Receiving DSC calls (other) The transceiver receives the following types of DSC calls. ••Individual call (p. 35) ••Individual Acknowledgement call (p. 25) ••Group call (p. 36) ••All Ships call (p. 37) ••Position Request call (p. 38) ••Test call (p. 39) ••Test Acknowledgement call
  • Icom M93D | Instruction Manual - Page 43
    channel that is assigned by the caller is automatically L[PAUSE] is not displayed if the "CH Auto Switch" item is set to "Manual." (p. 42) 4 ••Pauses the countdown until the assigned channel is 5 automatically selected. ••Select [RESUME] to resume the countdown. 6 selected after 10 seconds
  • Icom M93D | Instruction Manual - Page 44
    ••" " blinks continuously until you display the call message. [PAUSE] L[PAUSE] is not displayed if the "CH Auto Switch" item is set to "Manual." (p. 42) ••Pauses the countdown until the assigned channel is automatically selected. ••Select [RESUME] to resume the countdown. ••The call is saved in
  • Icom M93D | Instruction Manual - Page 45
    the Position 16 Reply is automatically sent to the calling station. (p. 42) ••However, even if the Auto ACK function is set to "Manual," after receiving a Distress Acknowledgement, or while in the Distress Cancel call procedure, the Position Reply is automatically sent to the calling station
  • Icom M93D | Instruction Manual - Page 46
    call TIP: By default, the Auto ACK function automatically sends an Acknowledgement to the calling station (p. 42). If the function is set to "Manual," the following screens are displayed. When a Test call is received: ••The alarm sounds for 2 minutes. ••"RCVD Test Call" is displayed. 1. Push any
  • Icom M93D | Instruction Manual - Page 47
    DDReceiving a Test Acknowledgement call After sending a Test call, the called station will send you a Test Acknowledgement call. When a Test Acknowledgement call is received: ••The alarm sounds for 2 minutes. ••"Received ACK" is displayed. Push any software key to turn OFF the alarm. ••The
  • Icom M93D | Instruction Manual - Page 48
    8 DSC OPERATION DDReceived DSC log (Conitnued) 4. Push [▲] or [▼] to scroll through the log. 5. Push [ENT] to display the received call's information. Received Distress log Received DSC log DDSent DSC Log The transceiver saves up to 50 DSC sent calls in your DSC Log. 1. Display the "DSC Log" screen
  • Icom M93D | Instruction Manual - Page 49
    not push the 8 software key below [ACPT] in 10 seconds, the 9 transceiver ignores the call, and then remains on the current operating channel. 10 Manual: A fter receiving a DSC call, you can select whether 11 or not to accept the received DSC call. 12 DSC Switch (Default: On) 13 Select
  • Icom M93D | Instruction Manual - Page 50
    2 minutes after turning ON the transceiver. - the received position data has not been updated for 10 minutes. - the received position data or manually entered position data has not been updated for 4 hours. ••Self-Terminate (Default: On) An alarm sounds when duplicate Distress calls are received
  • Icom M93D | Instruction Manual - Page 51
    calls while the 11 transceiver is OFF. 12 13 NOTE: If "NG" is displayed, either or both the sending and 14 receiving DSC circuits have a problem. In that case, you will have to send the transceiver to your dealer for repair. 15 16 44
  • Icom M93D | Instruction Manual - Page 52
    9 OTHER FUNCTIONS ■■MOB (Man OverBoard) You can enter a Man OverBoard (MOB) waypoint into the transceiver with its GPS position data, as soon as a person has fallen into the water and needs to be rescued. This enables you to reach the MOB position even in the dark, or when you have lost visual
  • Icom M93D | Instruction Manual - Page 53
    , and select [ABC] to use numbers and letters. 13 ••Select characters or space using Push [ENT] to enter the selected character. 14 Manually entering a Waypoint: ••Select "←" or "→," to move the cursor. 15 1. Push [◄] or [►] to display . 2. Push the 16 2. Push the software key below
  • Icom M93D | Instruction Manual - Page 54
    9 OTHER FUNCTIONS ■■Waypoint (Continued) DDEntering a received position After receiving a Distress call that includes position data, you can enter the position as a Waypoint. This enables you to reach the caller's position. 1. Push [◄] or [►] to display . 2. Push the software key below . ••The "
  • Icom M93D | Instruction Manual - Page 55
    1 Adding a Waypoint: Push the software key below [ADD] to add a Waypoint. LAdd the Waypoint in the same manner that is described in "Manually entering a Waypoint" on page 46. The Navigation function navigates from your current position 2 to an entered regular Waypoint or MOB waypoint. 3 Start
  • Icom M93D | Instruction Manual - Page 56
    push the software key below [NAV] to start navigating to the Waypoint. 49 DDNavigation screen description Range displays the radius of a compass circle. Push [▲] or [▼] to change the range between 0.125, 0.25, 0.5, 0.75, 1.5, 3, 6, and 12 nm. Displays the display's direction type. Push the software
  • Icom M93D | Instruction Manual - Page 57
    OTHER FUNCTIONS 9 ■■Compass The Compass shows your vessel's Course Over Ground (COG) and Speed Over Ground (SOG). 1. Push [◄] or [►] to display . 2. Push the software key below . ••The "Compass" screen is displayed. ■■GPS/GNSS 1 The GPS or GNSS "Status" screen displays the quantity, 2 signal
  • Icom M93D | Instruction Manual - Page 58
    9 OTHER FUNCTIONS DDGPS/GNSS Status screen (Continued) Sky view description: GPS mode* Your position Sky view ••Image of the satellite Satellite A / Elevation angle 90 degree line (Zenith) Elevation angle 60 degree line & Elevation angle 30 degree line Elevation angle 0 degree line 4 8 *
  • Icom M93D | Instruction Manual - Page 59
    DDGPS/GNSS Information screen Information screen description: 1. Push [MENU]. ••The Menu screen is displayed. 2. Push [▲] or [▼] to select "GPS," and then push [ENT]. ••The "GPS" screen is displayed. L"GNSS" may be displayed, instead of "GPS," depending on the transceiver version. 3. Push [▲] or
  • Icom M93D | Instruction Manual - Page 60
    10 MENU SCREEN ■■Using the Menu screen The Menu screen is used to set items, select options, and so on for the transceiver's functions. DDUsing the Menu screen Example: Setting the channel group to "INT." 1. Push [MENU]. ••The Menu screen is displayed. 3. Push [▲] or [▼] to select "CHAN Group,"
  • Icom M93D | Instruction Manual - Page 61
    ■■Menu screen items The Menu screen contains the following items. Compose Distress Item Undesignated Fire,Explosion Flooding Collision Grounding Capsizing Ref. p. 23 p. 23 p. 23 p. 23 p. 23 p. 23 Item Sinking Adrift Abandoning Ship Piracy Man Overboard - Compose Other Item Individual Call Group
  • Icom M93D | Instruction Manual - Page 62
    10 MENU SCREEN ■■Radio Settings items Scan Type (Default: -) CHAN Group (Default: -) The transceiver has 2 scan types. Select Normal Scan and Priority Scan. • Normal Scan: Scans all Favorite channels in the selected channel group. • Priority Scan: S equentially scans all Favorite channels,
  • Icom M93D | Instruction Manual - Page 63
    MENU SCREEN 10 1 Noise Cancel (Default: Off) FAV Settings 2 The Noise Cancel function reduces random noise You can set all channels as Favorite channels, clear all 3 components in the received or transmitted signal. Set the settings, or reset to default. By default, some channels 4
  • Icom M93D | Instruction Manual - Page 64
    The screen stays dimly lit, even if the backlight is turned OFF after no key is pushed for 5 seconds. LIf you want to reduce the battery consumption, turn this function OFF. Display Contrast (Default: 4) You can adjust the display contrast level between 1 and 8. One is the lowest contrast level
  • Icom M93D | Instruction Manual - Page 65
    when the transceiver displays a screen that is related to a Distress call. Power Save (Default: On) RT Related (Default: 30 sec) This function conserves battery power. The power save This setting is for when the transceiver is in the Radio function is automatically turned ON when no signal is
  • Icom M93D | Instruction Manual - Page 66
    your Icom dealer or distributor. R WARNING! NEVER let fluid from inside the battery come in contact with your body. It it does, immediately wash with clean water. CAUTION: DO NOT use the battery pack out of the specified temperature range. • IC-M93D: -20°C ~ +60°C (-4°F ~ +140°F) • IC-M93D EURO
  • Icom M93D | Instruction Manual - Page 67
    : range, the charging will automatically stop. 11 ••Approximately five years have passed since the battery was manufactured. ••The battery has environments, the safety/protection circuit in the battery will activate, causing the battery to stop charging. Guide tabs 14 15 16 R DANGER! NEVER
  • Icom M93D | Instruction Manual - Page 68
    the BC-123S. CP-25H* (for a 12 V cigarette lighter sockect) or OPC-515L (for a 12 V power source) can be used instead of the BC-123S. Battery pack Turn OFF BC-220 BC-123S* power adapter *A different type may be supplied, or may not be supplied, depending on the transceiver version. CAUTION
  • Icom M93D | Instruction Manual - Page 69
    / Black line: _ 5 ••Charging time: approximately 3 hours. LYou can also use the OPC-656* dc power cable instead of the 6 BC-157S and AD-133. 7 Battery pack The charger adapters Turn OFF (AD-133) are installed in each slot. The type NEVER transmit near the BC-214 or the power adapter
  • Icom M93D | Instruction Manual - Page 70
    12 OPTIONAL SPEAKER MICROPHONE ■■About the HM-165 Alligator type clip Attaches to your shirt, collar, pocket, and so on. PTT switch Push to transmit. Release to receive. Microphone Speaker Turn OFF the transceiver, when connecting the HM-165. ■■Attaching the HM-165 1. Turn OFF the transceiver. 2.
  • Icom M93D | Instruction Manual - Page 71
    13 TROUBLESHOOTING PROBLEM POSSIBLE CAUSE SOLUTION REF. 1 You cannot turn ON the ••The Battery is exhausted or over ••Recharge the battery pack. p. 61 2 transceiver. discharged. ••The Battery pack is not correctly attached. ••Correctly attach the battery pack. p. 2 3 Little or no
  • Icom M93D | Instruction Manual - Page 72
    IC-M93D DDGeneral • Frequency coverage: TX 156.025 ~ 157.425 MHz RX 156.050 ~ 163.275 MHz • Mode: FM (16K0G3E), DSC (16K0G2B) • Operating temperature range 0.9 W typical (Internal) with a 12 ˘ load at 1 kHz IC-M93D EURO DDGeneral • Frequency coverage: TX 156.000 ~ 161.450 MHz (156
  • Icom M93D | Instruction Manual - Page 73
    load 0.9 W typical (Internal) with a 12 ˘ load at 1 kHz IC-M93D EURO (Australian version) DDGeneral • Frequency coverage: TX 156.025 ~ 157.425 DSC (16K0G2B) 0.2 W (External) with an 8 ˘ load • Operating temperature range: -10°C ~ +55°C 0.9 W typical (Internal) with a • Current drain
  • Icom M93D | Instruction Manual - Page 74
    • BC-220 rapid charger + BC-123S ac adapter F or rapid charging of battery pack. (Charging time: approximately 3 hours) • BC-214 rapid charger + CP-25H is equipped with a 1 A fuse. If the fuse blows, repair the problem, then replace it with a new rated fuse. DO NOT use fuses with amp ratings
  • Icom M93D | Instruction Manual - Page 75
    15 CHANNEL LIST DDFor IC-M93D and IC-M93D EURO (Australia) 1 Channel number Frequency (MHz) Channel number Frequency (MHz) Channel number Frequency (MHz) Channel number Frequency (MHz) USA INT CAN Transmit Receive USA INT CAN
  • Icom M93D | Instruction Manual - Page 76
    15 CHANNEL LIST DDFor IC-M93D EURO ● International channels Frequency (MHz) Frequency (MHz) Frequency (MHz) when these channels are used in its territorial waters. *2 UK Marina Channels: M1=37A (157.850 MHz), M2=P4 (161.425 MHz) for UK version only. *3 T he output power of channels 75
  • Icom M93D | Instruction Manual - Page 77
    CHANNEL LIST 15 DDFor IC-M93D EURO 1 ● USA channels (for UK version only) 2 Frequency (MHz) Frequency (MHz) Frequency (MHz) Frequency (MHz) Frequency (MHz) Frequency (MHz) CH Transmit Receive CH Transmit Receive CH Transmit Receive CH Transmit
  • Icom M93D | Instruction Manual - Page 78
    accessories other than those specified may result in RF exposure levels exceeding the FCC and IC requirements for wireless RF exposure.; Belt Clip (MB-133), Rechargeable Li-ion Battery Pack (BP-285). ••Health Canada , and only use the Icom belt-clips listed in "OPTIONS" when attaching the radio to your
  • Icom M93D | Instruction Manual - Page 79
    INDEX Accessories 2 Alarm Status (DSC Auto ACK (DSC Settings).........42 Backlight (Configuration).........57 Battery Charger, optional 62 Charger, regular 61 Indicator 6 , entering 21 Transmitting (basic 14 Tri-watch 18 Troubleshooting 64 Unread Return (DSC Settings)....43 UTC Offset (
  • Icom M93D | Instruction Manual - Page 80
    < Intended Country of Use > AT BE CY CZ DK EE FI FR DE GR HU IE IT LV LT LU MT NL PL PT SK SI ES SE GB IS LI NO CH BG RO TR HR A-7316H-1EX Printed in Japan © 2016 Icom Inc. 1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
INSTRUCTION MANUAL
This device complies with Part 15 of the FCC Rules. Operation is
subject to the condition that this device does not cause harmful
interference.
VHF MARINE TRANSCEIVER
iM93D EURO
iM93D