Insignia NS-46L550A11 User Manual (English) - Page 17
Programming a different universal remote control, Universal remote control makes and models
View all Insignia NS-46L550A11 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
32"/37"/42"/46" LCD, 120 Hz 1080p 6 Press the button in the new mode that should perform the function (for example, Play). The LED blinks twice. 7 Repeat Steps 1-6 to move additional buttons. To restore all buttonmoved data in a specific mode: 1 Press and hold SET until the LED blinks twice, then release. 2 Press 9 9 4. The LED blinks twice. 3 Press the device button you want to remove all buttonmoved data from twice. The LED blinks twice. 4 Repeat for each device you want to restore. To restore original button function: 1 Press the device button for which you want to remove the buttonmoved data from a specific button. 2 Press and hold SET until the LED blinks twice, then release. 3 Enter 9 9 4. The LED blinks twice. 4 Press the button you want to remove the buttonmoved data from twice. The LED blinks twice. 5 Repeat Steps 1-4 for additional buttons you want to remove. Programming macros Your Insignia universal remote control includes the ability to program any button (other than the SET button) with a macro function. Each one can be set up to perform a pre-programmed set of sequential button presses with the press of a single button. A macro can be used to control a home theater operation, to set a favorite channel, or for other functions you would like to control with one button press. Each macro button can hold up to 15 button presses, total. Note Programming a new macro over an existing one erases the original macro. To program a mode-independent macro: 1 Press and hold SET until the red LED blinks twice, then release. 2 Press 9 9 5. The LED blinks twice. 3 Press the button you want to assign to a macro. 4 Enter the series of commands you want the macro to execute (up to 15 commands). 5 Press and hold SET until the red LED blinks twice, then release. Now, when you press the preset macro button, the remote sends the series of commands you have entered, regardless of what mode you are in. For example, you could program a macro button to turn on both your TV and cable box and select a particular channel. Note To clear the macro, repeat Steps 1-5, but do not enter a series of commands at Step 4. To program a mode-dependent macro: 1 Press the device mode button (TV, DVD, STB, or AUX). 2 Press and hold SET until the LED blinks twice, then release. 3 Press 9 7 8. The LED blinks twice. 4 Press the button you want to assign to a macro. 5 Enter the series of commands you want the macro to execute (up to 15 commands). 6 Press and hold SET until the red LED blinks twice, then release. Now, when you press the macro button, the remote sends the series of commands you have entered, but only if you are in the mode you selected in Step 1. For example, you could program the macro button to turn on both your TV and cable box and select a particular channel, but only if you are in TV mode. If you are in DVD mode, this button does not execute the macro you set up in TV mode. Note To clear the macro, repeat Steps 1-6, but do not enter a series of commands at Step 5. Programming a different universal remote control You can operate your Insignia TV with a new or existing universal remote control. To program a different universal remote control: 1 See the table below for common codes. If you have problems programming your remote or need a different remote control code, visit www.insigniaproducts.com for the latest remote control code information. Insignia TV codes for universal remote controls (for all Insignia TVs manufactured after Jan. 1, 2007) Universal remote control makes and models Philips PHDVD5, PH5DSS, PMDVR8, PDVR8 RCA RCU807 One for All URC-6690 Sony RM-VL600 115 135 0464 8043 Comcast M1057 0463 Set-top box makes and models Dish Network Motorola VIP508, VIP622 DRC800 TIVO Series 3, HD 720 0463 0091 DirectTV RC23 10463 Codes for other remote controls are available online at: www.insigniaproducts.com Tips • The brand name is often visible on the front of the universal remote control, and the model number is often visible on the back. • If your universal remote control isn't listed on the chart, refer to your universal remote control's instructions and try codes for the brands Orion, Emerson, Memorex, Sansui, Sylvania, or Zenith. You may need to try several codes before finding a match. www.insigniaproducts.com 13