Insignia NS-BRDVD3 Quick Setup Guide (English) - Page 2

8 Press  or  to highlight the Password field, then press ENTER. An on-screen keyboard appears. 9 Press or  to highlight the first letter in the password, then press ENTER. Repeat this step to enter the rest of the password. If you make a mistake, use the backspace key to delete the character 10 After you enter the password, highlight , then press ENTER to close the keyboard. 11 Press  to highlight OK, then press ENTER. The Network List reopens. 12 If necessary, press  or  to highlight the network again, then press ENTER. The option list reopens. Connecting to a wireless network using WPS (Wi-Fi Protected Setup) Push button NOTE: The steps in this task are based on using the remote control that came with your player. To set up a network connection: 1 Press ENTER. The Settings menu opens. 2 Press  or  to select Network. The Network menu opens. 3 Press , press  or  to highlight Wireless, then press ENTER. A list of network options opens. 4 Press  or  to highlight WiFi Protected Setup, then press ENTER. The following screen appears. 13 Press  or  to highlight Connect, then press ENTER. If the wireless network is working, you should see the message shown below: 5 Press the WPS button on your router. The following screen should appear. When you see "Success" on the screen, your player is connected to the router. You may also briefly see a "connected" message appear on the TV. Press ENTER to remove the message from the TV screen. If the message shown above does not appear, your Blu-ray player is not connected to the network. Repeat this task again. 6 Press ENTER to close the message. © 2009 BBY Solutions, Inc. All rights reserved. INSIGNIA is a trademark of BBY Solutions, Inc. Registered in some countries. All other products and brand names are trademarks of their respective owners. ENGLISH 09-0929