Insignia NS-LBD32X-10A User Manual (English) - Page 46

Selecting the aspect ratio To adjust the aspect ratio: 1 Press BD to switch to Blu-ray mode. 2 Press SETUP. The Setup Menu opens. NS-LBD32X-10A Insignia 32" LCD TV/Blu-ray DVD Combo, 1080p Adjusting the digital audio output To adjust the digital audio output: 1 Press BD to switch to Blu-ray mode. 2 Press SETUP. The Setup Menu opens. 3 Press or to select Display, then press to move to the list of options. 3 Press or to select Audio, then press to move to the list of options. Bitstream Bitstream Mixed PCM Stereo 4 Press , then press or to select an aspect ratio. You can select: 16:9 Wide or 16:9 Pillarbox, then press ENTER. Note This setting applies to Blu-ray mode only. It changes the aspect ratio for a disc recorded at in a 4:3 format, but does not change the aspect ration for a disc recorded in a 16:9 format. 5 Press to save your selection and return to the previous menu level. Or Press SETUP to close the Setup Menu. Digital Output Settings 4 Press to select Digital Output, then press to move to the list of options. 5 Press or to select an option. You can select: • Bitstream-Sends the original bitstream from disc over SPDIF using legacy audio formats. Blu-ray Disc audio is limited to the soundtrack for main movie and does not send PiP audio or audio effects. • Bitstream mixed-Blu-ray Disc audio streams are mixed and encoded into a single bitstream. Use this option if you are using an SPDIF 5.1CH receiver and you want to enjoy mixed Blu-ray Disc audio in surround sound. • PCM Stereo-Sends mixed digital audio over SPDIF in two-channel PCM format. Note When Bitstream is selected, your TV/Blu-ray combo cannot output secondary audio. 6 Press to save your selection and return to the previous menu level. Or Press SETUP to close the Setup Menu. 42 www.insigniaproducts.com